| Optical Power Measurement: |
W, dBm |
| Range Setting: |
Auto (Manual setting available) |
| Accuracy: |
±0.7% (±5% in combination with the optional sensor) |
| Wavelength Sensitivity Compensation: |
Can be set for every 1nm.
Automatic compensation for the sensor’s sensitivity
Max. 10 wavelengths preset (including initial value for a sensor) |
| Scaling: |
Can be set for each wavelength |
| Relative Measurement: |
Display the relative value to the measured value or set value. (Displayed value = Measured value – Reference value)
Reference value can be set from the measured value or manual input.
Settable range: 0.001nW to 1.9999W (-90.00dBm to 33.00dBm) |
| Display: |
4-1/2 digit, (19999 max.), Display resolution: 0.01dBm / 0.01dB |
| Measurement Display Unit: |
nW, mW, mW, dBm, dB |
| Max/Min Display: |
Maximum and minimum value display while measurement |
| Average Display: |
Display the moving average value.
Averaging times: 2 to 100 |
| Analog Output: |
1V approx. when the sensor calibration point input |
| Interface: |
USB Ver1.1
Output measurement value and remote control |
| Auxiliary Functions: |
Auto power save, Setting backup, Battery check |
| Safety: |
EN61010-1: 2001 Pollution degree 2 |
| Power Supply: |
AA (LR6) × 4, AC adapter (9445-02) |
| Continuous Battery Operation: |
60 hours approx. (continuous use with the 9742 at calibration point input) |
| Dimensions: |
85mm (W) × 160mm (H) × 35mm (D) |
| Weight: |
270g (excluding batteries) |
