Rigol DSA705

Instrumentos:

Para pruebas de:

Inicio > Rigol >

Rigol DSA705, Analizador de Espectro de 500 MHz

DSA705

Vistas alternativas:

Precio: $1,153.90 Dólares+IVA

Disponibilidad: 4 a 6 Semanas
Codigo del Producto: DSA705

Descripcion

Detalle del producto

Ver Hoja de Datos en formato PDF

Model		DSA705	DSA710
Frequency
Frequency	Range	100kHz - 500MHz	100kHz - 1GHz
	Resolution	1Hz
Resolution Bandwidth		100Hz to 1MHz, in 1-3-10 sequence Uncertainty <5% nominal Filter shape factor (60dB : 3dB) <5 nominal
Video Bandwidth		1Hz to 3MHz, in 1-3-10 sequence
Internal Reference	Frequency	10MHz
	Accuracy	±(time since last calibration x aging rate + temperature stability + calibration accuracy)
	Initial Calibration Accuracy	<1ppm
	Temperature Stability	<2ppm, (0⁰C to 50⁰C, referenced to 25⁰C)
	Aging Rate	<2ppm/year
Frequency Readout Accuracy	Marker Resolution	span / (number of sweep points - 1)
	Marker Uncertainty	±(frequency indication x reference frequency accuracy + 1% x span + 10% x resolution bandwidth + marker resolution)
Frequency Counter	Resolution	1Hz, 10Hz, 100Hz, 1kHz, 10kHz, 100kHz
	Uncertainty	±(frequency indication × reference frequency accuracy + counter resolution)
Frequency Span	Range	0Hz, 100Hz to maximum frequency of instrument
	Uncertainty	±span / (number of sweep points - 1)
SSB Phase Noise [1]	@ 10kHz offset	<-80dBc/Hz
	@ 100kHz offset	<-100dBc/Hz typ.
Residual FM		<50Hz nom., (20⁰C to 30⁰C, RBW = VBW = 1kHz)
Amplitude
Measurement Range		DANL to +20dBm (f _c ≥10MHz)
Maximum Input Level	CW RF Power	+20dBm (attenuation = 30dB) Please refer to the DSA700 series datasheet for more detail
	Maximum Damage Level	+30dBm (1W) Please refer to the DSA700 series datasheet for more detail When fc ≥10 MHz, the input level is >+25 dBm and the PA is off, the protection switch will be on
	DC Voltage	50V
Displayed Average Noise Level, DANL [2]	Preamplifier Off	<-110dBm/Hz, <-130dBm/Hz typ. (100kHz to 1MHz) <-130dBm/Hz + 6 x (f/1GHz)dB, <-135dBm/Hz typ. (1MHz to 1GHz)
	Preamplifier On	<-130dBm/Hz, <-150dBm/Hz typ. (100kHz to 1MHz) <-150dBm/Hz + 6 x (f/1GHz)dB, <-155dBm/Hz typ. (1MHz to 1GHz)
Display - Level Axis	Logarithmic Scale	1dB to 200dB
	Linear Scale	0 to Reference Level
	Number of Display Points	601
	Number of Traces	3 + Math Trace
	Trace Detectors	Normal, Positive-Peak, Negative-Peak, Sample, RMS, Voltage Average, Quasi-Peak (with EMI-DSA800 option)
	Trace Functions	Clear Write, Max Hold, Min Hold, Average, View, Blank
	Units	dBm, dBmV, dBμV, nV, μV, mV, V, nW, μW, mW, W
Frequency Response	Preamplifier Off [3]	<0.7dB
	Preamplifier On [4]	<1.0dB
Input Attenuator	Range	0dB to 30dB in 1dB steps
	Switching Uncertainty [5]	<0.5dB
Absolute Amplitude Uncertainty [6]		<0.4dB
RBW Switching Uncertainty		<0.1dB (relative to 1kHz RBW)
Reference Level	Range	-100dBm to +20dBm in 1dB steps
	Resolution	0.01dB (log scale) 4 digits (linear scale)
Preamplifier Gain		20dB nom.
Level Measurement Uncertainty [7]		<1.5dB nom.
RF Input VSWR		<1.5:1 nom. (attenuation ≥10dB)
Second Harmonic Intercept [8]		+40dBm
Third-Order Intercept [9]		+10dBm
1dB Gain Compression Point (P _1dB) - Input Mixer [10]		>0dBm
Spurious Response	Inherent [11]	<-88dBm typ.
	Intermediate Frequency	<-60dBc
	System Related Sidebands [12]	<-60dBc
	Input Related Spurious	<-60dBc (mixer level = -30dBm)
Sweep
Sweep Mode		Continuous, Single
Sweep Time		10ms to 500s (span ≥ 100Hz) 20µs to 500s (zero span)	10ms to 1,000s (span ≥100Hz) 20µs to 1,000s (zero span)
Sweep Time Uncertainty		5% nom. (span ≥100Hz or zero span sweep time setting >1ms)
Trigger
Trigger Source		Free Run, Video, External
External Trigger Level		5V TTL
Signal Seamless Capture (Option)
Measurement Bandwidth		202kHz
Measurement Speed		650 spectra/s
Input / Output
RF Input	Impedance	50Ω
	Connector	N-type female
Internal Reference	Frequency	10MHz
	Output Level	+3dBm to +10dBm, +8dBm typ.
	Impedance	50Ω nom.
	Connector	BNC female
External Reference	Frequency	10MHz ± 5ppm
	Input Level	0dBm to +10dBm
	Impedance	50Ω nom.
	Connector	BNC female
External Trigger Input	Impedance	1kΩ nom.
	Connector	BNC female
USB Host	Connector	A plug
	Protocol	v2.0
USB Device	Connector	B plug
	Protocol	v2.0
LAN	LXI core 2011 device	10/100 Base, RJ-45
IEC/IEEE (GPIB) bus (Optional)		IEEE488.2
General Specifications
Display	Type	10MHz ± 5ppm
	Resolution	0dBm to +10dBm
	Size	8"
	Colours	64k
Printer Support		PictBridge
Memory	Internal	Flash disk
	External	USB storage device (not supplied)
Power Supply	AC Input Voltage Range	100V to 240V nom.
	AC Supply Frequency	45Hz to 440Hz
	Power Consumption	35W typ., 50W max. with all options
Environmental	Temperature	0⁰C to 50⁰C, operating -20⁰C to 70⁰C, storage
	Humidity	≤95% relative humidity (0⁰C to 30⁰C) ≤75% relative humidity (30⁰C to 40⁰C)
	Altitude	3,000m max.
EMC	In line with EN61326-1:2006
	IEC 61000-4-2:2001	±4.0kV (contact discharge) ±4.0kV (air discharge)
	IEC 61000-4-3:2002	3V/m (80MHz to 1GHz) 3V/m (1.4GHz to 2GHz) 1V/m (2.0GHz to 2.7GHz)
	IEC 61000-4-4:2004	1kV power lines
	IEC 61000-4-5:2001	0.5kV (phase to neutral) 0.5kV (phase to PE) 1kV (neutral to PE)
	IEC 61000-4-6:2003	3V (0.15MHz to 80MHz)
	IEC 61000-4-11:2004	voltage dip: 0% UT during half cycle, 0% UT during 1 cycle, 70% UT during 25 cycles short interruption: 0% UT during 250 cycles
Dimensions (W x H x D)		362mm x 179mm x 128mm
Weight		4.25kg (9.4lb)
Recommended Calibration Interval		1 year
Tracking Generator		Not available - Please refer to Rigol DSA800 series.

[1] 20⁰C to 30⁰C, fc = 500MHz (DSA705), fc = 1GHz (DSA710)
[2] attenuation = 0dB, RBW = VBW = 100Hz, sample detector, trace average ≥ 50, 20℃ to 30℃, input impedence = 50Ω
[3] fc ≥100kHz, attenuation = 10dB, relative to 50MHz, 20℃ to 30℃
[4] fc ≥ 1MHz, attenuation = 10dB, relative to 50MHz, 20℃ to 30℃
[5] fc = 50MHz, relative to 10dB, 20℃ to 30℃
[6] fc = 50MHz, peak detector, preamplifier off, attenuation = 10dB, input signal level = -10dBm, 20℃ to 30℃
[7] 95% confidence level, S/N >20dB, RBW = VBW = 1kHz, preamplifier off, attenuation = 10dB, -50dBm < input level ≤ 0dBm, fc >10MHz, 20℃ to 30℃
[8] fc ≥50MHz, input signal level = -20dBm, attenuation = 10dB
[9] fc ≥50MHz, two -20dBm tones at input mixer spaced by 200kHz, attenuation = 10dB
[10] fc ≥50MHz, attenuation = 0dB
[11] Input terminated 50Ω, attenuation = 0dB, 20℃ to 30℃
[12] Referenced to local oscillators, referenced to A/D conversion, referenced to subharmonic of first LO, referenced to harmonic of first LO

Descripcion

La nueva serie DSA700 de analizadores de espectro de Rigol consiste en un modelo de 500 MHz y uno de 1 GHz - reduciendo el costo para usuarios trabajando por debajo de 1 GHz. Compacto, ligero, fácil de usar y de gran valor por el costo, el desempeño y las características de estos versátiles instrumentos los hacen idealmente adecuados para varios ambientes - aficionados, laboratorios de I+D, educación y manufactura, por igual.

Rango de frecuencia de 100kHz a 500MHz
Nivel promedio desplegado de ruido (DANL) <- 155dBm/Hz típico con preamplificador encendido
Ancho de banda de de resolución mínimo (RBW) 100 Hz
Ruido de fase <-80dBc/Hz @ offset de 10 kHz
Incertidumbre de medición de nivel < 1.5dB
Pantalla de alta definición de 8" (800 x 480)
Eje de frecuencia lineal y logarítmico
Conectividad: LAN (LXI), Anfitrión USB y Dispositivo USB
Soporta PictBridge
Tamaño compacto y peso ligero
Software opcional para PC... Ultra Spectrum, S1210 Prueba de Pre-Cumplimiento EMI
Otras opciones incluyen... filtro EMI y detector de cuasi-picos, funciones avanzadas de medición, medición y análisis de 2FSK en modo de captura continua de señal, módulo USB a GPIB, kit de montaje en estantería, bolsa de transporte suave, kit de demostración de transmisor RF, kit de demostración de receptor RF, atenuador de alta potencia, calibración estándar RCL

Comparte tu conocimiento de este producto con otros clientes... Se el primero en escribir un comentario

Navegue por mas productos en la misma categoria de este articulo:

Rigol
Analizadores > Analizadores de Espectro
Analizadores > Analizadores de Espectro > De banco
Rigol > Analizadores de Espectros RIGOL