Model Name | SuperBOT-2 | SuperBOT-3 | SuperBOT-4 |
| 16-Socket Automated IC Programmer | 32-Socket Automated IC Programmer | Desktop Automated IC Programmer |
# of Sockets | 16 | 32 | 16 |
MAX Throughput | 1200 Unit Per Hour (UPH) | 2400 UPH. Throughput 60 times higher than SuperBOT-1 for eMMC devices. | 600 Unit Per Hour (UPH) |
# of Internal Programmers | Four SuperPro 7500 | Eight SuperPro 7500 | Four SuperPro 7500 |
Investment | Cost recovery in short period with low investment in the beginning. | Cost recovery in short period with higher investment in the beginning. | Minimal Investment |
Continuous Hours of operation | 24 Hours | 24 Hours | 8+ Hours depending on number of operator shifts |
Time required for production | Time required to process large chip quantities is faster with automation. | Time required to process large chip quantities is faster with automation. | Time required is very less than Manual handling of chips. |
Operation Cost | Less manpower needed for operation thus saving operation cost. Two operators needed for manual programming are reduced to one for automated operations. | Less manpower needed for operation thus saving operation cost. Two operators needed for manual programming are reduced to one for automated operations. | Less manpower needed for operation thus saving operation cost. However, operator should always be present for inserting and removing trays. |
Production Errors | Less handling in production line reduces human induced errors and failures resulting in higher reliability. | Less handling in production line reduces human induced errors and failures resulting in higher reliability. | Less handling in production line reduces human induced errors and failures resulting in higher reliability. |
Manpower | One person can supervise many SuperBOT machines; once SuperBOTs are programmed they can usually be left to operate by themselves. | One person can supervise many SuperBOT machines; once SuperBOTs are programmed they can usually be left to operate by themselves. | 1 worker needed with multiple shifts |
I/O Support | Supports tray, tape, and tube input and output
| Supports tray, tape, and tube input and output
| Supports tray I/O |
Pick and Place Nozzles | One Pick & Place Nozzle | Four Pick & Place nozzles | One Pick & Place Nozzle |
Tape Feeders | 1 tape Feeder | 2 Tape Feeders | N/A |
Laser Ink Marking Support | An optional attachment is available for the tape-out or the auto tray device. Marks up to 4 characters on the passed chips. | An optional attachment is available for the tape-out or the auto tray device. Marks up to 4 characters on the passed chips. | N/A |
Remote Control | Remote project loading, quality monitoring, volume control, file security. | Remote project loading, quality monitoring, volume control, file security. | Remote project loading, quality monitoring, volume control, file security. |
