GW Instek GSP-810

Instrumentos:

Para pruebas de:

Inicio > Descontinuados >

GW Instek GSP-810, Analizador de Espectros 150KHz-1GHz, Pantalla Monocromatica

GSP-810

Disponibilidad: Producto descontinuado
Codigo del Producto: GSP-810

Descripcion

Detalle del producto

Ver Hoja de Datos en formato PDF

FREQUENCY
Frequency Range	150kHz ~ 1000MHz
Frequency Resolution	1kHz C.F. entry, 40Hz Sweep resolution at 2kHz/DIV
Frequency Display	6 1/2 digit setting
Frequency Control	Digital phase locked
Frequency Stability	±2ppm/year aging,±10ppm, 0 to 50°C
Frequency Spans	Zero, 2kHz to 100MHz/DIV, in a 1-2-5 sequence

BANDWIDTH
Resolution Bandwidths	3kHz,30kHz, 220kHz, 4MHz
Resolution BW Accuracy	15%
Video Bandwidth	1.6kHz/90kHz coupled with RBW

AMPLITUDE
Reference Level Range	-30dBm to +20dBm
Reference Level Accuracy	±1dB at 80MHz
Input Level Range	-100dBm to +20dBm
Noise Floor	-95dBm@30kHz RBW, -100dBm typical/-75dBm:150kHz ~ 10MHz
Amplitude Display Range	75dB
Amplitude Accuracy	±1.5dB typical@0dBm, 80MHz
Amplitude Level Linearity	±1.5dB over 70dB
Ref. Level Freq. Flatness	±1.5dB over 100MHz, ±2.5dB typical over entire band/±3dB:150kHz ~10MHz
Harmonic Spur Response	<-40dBc, RF input < selected reference
Non-Harmonic Spur Response	<-60dBc typical down from reference level, average, 5MHz/div
Intermodulation(3rd)	<-70dBc, @-40dBm input, 2 tones, 2MHz apart/<-45dBc:150kHz ~10MHz
Phase Noise	-77dBc/Hz at 1GHz, 30kHz offset

INPUT
Input Overload Protection	+30dBm continuous, ±25VDC
Impedance	50 ohm nominal
Return Loss	<16 dBRL (VSWR < 1.35)
Input Attenuation	50dB to 0dB in 10 dB steps coupled to reference level
Connector	Type N female

MARKER
Number of Markers	2
Marker Resolution	0.1dB, 1kHz
Marker Mode	Absolute, Relative, PK -> Marker, Marker -> Center
Marker Accuracy	0.1dB±amplitude accuracy

FUNCTIONS
Memory	9 memories of save/recall
Trace	Max. Hold, Average(2 ~ 32 traces), Freeze (Hold)
Setup	Access parameters

FM/AM DEMODULATOR
WB FM	120kHz deviation
MB FM	75kHz deviation
NB FM	30kHz deviation
AM Outputs	Internal speaker, 3.5mm stereo jack, wired for mono operation

REMOTE DISPLAY SOFTWARE & RS-232
Connecting to PC and getting trace from GSP-810, software will be downloaded from here

GENERAL
Power Source	100/120/220/230V AC±10%, 50/60Hz
Accessory	Operation manual x 1
Dimensions and Weight	310(W) x 150(H) x 455(D)mm, approx. 8.5kg

OPTIONS
TRACKING GENERATOR (OPTION 01)
Frequency Range	10MHz to 1000MHz
Amplitude Range	0 to -50dBm
Amplitude Resolution	1dB
Amplitude Accuracy	±1dB@0dBm, 80MHz
Attenuation Accuracy	±1dB@, 50MHz
Amplitude Flatness	±1dB@, 10MHz/DIV, ±1.5dB@0dB,entire band
Harmonics	<-30dBc
Reverse Power	<+30dBm
Impedance	50 ohm nominal
Return Loss	<10 dBRL (VSWR<2)
Connector	Type N female

POWER METER (OPTION 02)
Frequency Range	10MHz to 2GHz, usable to 2.7GHz
Power Level Range	-20dBm to +23dBm, usable to +30dBm
Power Level Overload	+40dBm<10% duty cycle, <10mS duration
Return Loss	<1:1.35 VSWR into 50 ohms, <1:1.25 typical
Readout Resolution	0.2mW, 100mW scale, 2µW, 1mW scale; 0.1dB, Log scale
Accuracy	±(10% rdg ±1digit)
Readout	mW or dBm

REMOTE CONTROL SOFTWARE (OPTION 03)
Connecting PC to get trace and provide the control for setting