 |
Caracteristicas
The Agilent 34923A module for the 34980A Multifunction Switch/Measure Unit is a high speed-multiplexer for general purpose scanning. It uses reed relays to achieve scan rates up to 500 channels-per-second. Use this module for high-throughput automated test applications as well as high-speed data logging and monitoring tasks.
Current measurements can be accomplished with user supplied shunts. Standard 50-pin Dsub connectors allow for use with standard cables, terminal blocks, or mass interconnect solutions. 2- and 4-wire channels may be mixed on the same module, or configure as an 80 1-wire multiplexer.
| Low Frequency Modules |
| Module |
Description |
Max Volts |
Max Current |
BW (MHz) |
Scan Ch/Sec |
Thermal Offset |
Comments |
| Multiplexers |
| 34921A |
40-ch armature multiplexer w/ low thermal offset |
300 V |
1 A |
45 MHz |
100 |
<3 µV |
· Temp reference · 4 current channels · Config as 2- or 4-wire |
| 34922A |
70-ch armature multiplexer |
300 V |
1 A |
25 MHz |
100 |
<3 µV |
Config as 2- or 4-wire |
| 34923A |
40/80-ch reed multiplexer |
80 V peak |
0.5 A |
45 MHz |
500 |
<50 µV |
Config as 1-, 2- or 4-wire |
| 34924A |
70-ch reed multiplexer |
80 V peak |
0.5 A |
25 MHz |
500 |
<50 µV |
Config as 2- or 4-wire |
| 34925A |
40/80-ch optically isolated FET multiplexer |
±80 V |
0.05 A |
1 MHz |
Contact Factory |
<3 µV |
Config as 1-, 2- or 4-wire |
| Matricies |
| 34931A |
Dual 4x8 armature matrix |
300 V |
1 A |
30 MHz |
100 |
<3 µV |
Backplane expandable |
| 34932A |
Dual 4x16 armature matrix |
300 V |
1 A |
30 MHz |
100 |
<3 µV |
Backplane expandable |
| 34933A |
Dual/Quad 4x8 reed matrix |
80 V peak |
0.5 A |
30 MHz |
500 |
<50 µV |
Backplane expandable Config as 1- or 2-wire |
| General Purpose |
| 34937A |
28-ch Form C and 4-channel Form A |
300 V 30 VDC/250 VAC |
1 A 5 A |
10 MHz |
N/A |
3 µV |
|
| 34938A |
20-ch 5 Amp Form A |
30 VDC / 250 VAC |
5 A |
10 MHz |
N/A |
3 µV |
|
| RF and Microwave Modules |
| Module |
Description |
Insertion Loss |
Cross Talk |
Bandwidth |
SWR |
Input Impedence |
Comments |
| 34941A |
Quad 1x4 50 Ù 1.5 GHz RF multiplexer |
Contact factory |
Contact factory |
Contact factory |
Contact factory |
50 Ù |
Specs @ 100 MHz |
| 34942A |
Quad 1x4 75 Ù 1.5 GHz RF multiplexer |
Contact factory |
Contact factory |
Contact factory |
Contact factory |
75 Ù |
Contact factory |
| 34945A |
Microwave switch/attenuator driver |
|
|
|
|
|
|
| 34946A |
Dual 1x2 SPDT terminated microwave switch |
<0.42 dB <0.69 dB |
>85 dB >67dB |
4 GHz or 20 GHz |
<1.15 <1.30 |
50 Ù |
@ 4 GHz @ 20 GHz |
| 34947A |
Triple 1x2 SPDT unterminated microwave switch |
<0.42 dB <0.69 dB |
>85 dB >67 dB |
4 GHz or 20 GHz |
<1.15 <1.30 |
50 Ù |
@ 4 GHz @ 20 GHz |
| System Control Modules |
| Module |
Description |
|
| 34950A |
64-bit digital I/O with memory and counter |
Eight 8-bit digital I/O channels with programmable polarity, thresholds up to 5 V, 7 handshaking protocols and pattern memory. Two 20 MHz frequency counter/totalizers. |
| 34951A |
4-channel isolated D/A converter with waveform memory |
Output DC voltage up to ±16 V or DC current up to ±20 Output waveforms with a 200 kHz update rate and 16 bits of resolution. Use on-board memory to create waveforms with more than 500,000 points. |
| 34952A |
Multifunction module with 32-bit DIO, 2-ch D/A and totalizer |
Four 8-bit digital I/O channels, two ±12-V analog outputs, and a 100 kHz gated totalizer. |
| 34959A |
Breadboard module |
Create your own custom designs with access to the +12 V and +5 V supplies, 16 GPIO ports and 32 drive lines. |
|
|
 |
 |
 |
 |
|
 |

| Accesorios para este Producto |
|
|
|

|