Caracteristicas
| Tone Generator & Cable Tracer Kit |
| Model#262
|
Tone Generator: The Tone Generator is a hand held, battery powered instrument designed to perform a variety of tests on unenergized telephone lines or LAN cables. Alligator clips and a standard RJ11 plug allow the tone generator to be connected to stripped wires, terminal panels, wall plates, or modular single line jacks. |
Features: Cable Tracer:
• Hi-gain, Hi-impedance amplifier
• Capable of identifying tones up to 12 inches away (under ideal conditions)
• Rugged, moisture resistant, Mylar cone speaker Tone Generator:
• Generates Warbled Tone with selectable test frequencies
• LED indicates continuity when in CONTINUITY mode
• LED indicates positive polarity when in POLARITY mode
• Provides talk current on a dead line
• Check line Polarity
Cable Tracer Specifications:
Dimensions (H x W x D): 7.37” x 1.87” x 1.12” (187.1 x 47.5 x 28.4 mm)
Weight: 4.9 oz. (138.9 g)
Power: Standard 9-volt battery
Tone Generator Specifications: Tone Output Level: Approximately 8 vp-p (+3dBm, 600
Tone Output Current: Approximately 4 mA Tone Frequency: 1.4KHz to 1KHz or 0.84KHz to 0.7KHz with switching freq. of 14Hz or 7Hz Continuity / Talk Test: 35mA (leads shorted), approximately 6.5 VDC (leads open)
|
Calibración
