View CartMy Account / Order StatusHelp
HACKER SAFE certified sites prevent over 99.9% of hacker crime.

Internet Payments






(Your shopping cart is empty)

  Inicio >

  Fluke 700HTP Bomba Hidraulica de Presion a 700 bar (Descontinuado) Usar 700HTP-1

FLUKE 700HTP Bomba Hidraulica de Presion a 700 bar
Fluke 700PTP


 
Artículo Descontinuado
Descontinuado

Codigo del Producto: 700HTP
 

Descripcion Especificaciones Tecnicas
 
Caracteristicas
700HTP Bomba hidráulica (700 bares)
700HTP Bomba hidráulica (700 bares)
La Fluke 700HTP esta diseñada para generar presiones de hasta  10,000 psi/700 bar/70,000 kPA. La Fluke 700HTP tiene dos puertos de presion:
3/8-BSP (ISO228) female parallel thread fitting for the reference gauge or pressure module
1/8-BSP (ISO228) female parallel thread fitting for the unit under test

Nota: El usuario debe proveer una mangera con las terminaciones adecuadas desde este puerto a la unidad bajo prueba.

  • Presion hasta 700 bar

 

This pump can provide up to 10,000 psi using distilled water or mineral-based hydraulic oil. The pump is operated by pumping several strokes to prime the system, then switching to high pressure mode when the resistance increases. An integral pressure adjustment vernier knob varies the pressurized volume by 0.6 cc. The pressure variation achievable with the vernier will depend on the nominal pressure and total pressurized volume, but with a minimum volume, the vernier provided 150-3,000 psi (at 150 psi nominal) and 3,000-10,000 psi (at 3,000 psi nominal) adjustment ranges. With a minimum volume and no pressure applied, the vernier can also be used to provide a 0 to 1.7 psi range. Larger volumes will provide a smaller range of adjustment, but greater resolution.
Included:
  • Adapter to connect the reference gauge port on the pump body to the 1/4 NPT male fitting on Fluke 700Pxx Pressure Modules (except 700P29, P30, and P31)
  • Adapter to connect the reference gauge port on the pump body to the 1/4 NPT female fitting on the Fluke 700P29, P30, and P31 Pressure Modules
  • Adapter to convert the unit under test port to a 1/4 NPT female
  • Replacement seal kit
  • Instruction sheet


Comparte tu conocimiento de este producto con otros clientes... Se el primero en escribir un comentario
Final Test
Calle de Ebano No. 10625 Fracc. Jardines de Chapultepec
Tijuana, B.C. México
C.P. 22025
Tel. (664) 681 1130
Fax. (664) 681 1150
Tel. 01800 027-4848
 About Us
  Used Test Equipment
 Privacy Policy
 Send Us Feedback