Caracteristicas Ancho de Banda de 100MHz, Dos Canales, con Retardo en el Barrido 10 Configuraciones que se pueden almacenar en memoria para desde el panel frontal llamarlas o salvarlas Base de Tiempo con Autorango Cursores y Lecturas en Pantalla con 7 Mediciones Capacidad Bloqueo de los controles digitales del panel fontal Alarma de Buzzer  Indicadores LED Sincronizacion con disparo de TV Senal de salida de disparo (Trigger Signal Output) Entrada de modulacion del eje - Z (intensidad del trazo)  Tecnologia SMD Alta Estabilidad y Confiabilidad

ESPECIFICACIONES CRT Type 6-inch rectangular type with internal graticule; 0%, 10%, 90% and 100% markers. 8 x 10 div (1 div = 1 cm) Accelerating Potential 16 kV approx. Illumination Continuously adjustable Z-axis input Coupling : DC Sensitivity: 5V or more Maximum input voltage : 30V (DC + AC peak) at 1kHz or less Bandwidth : DC ~ 5 MHz VERTICAL SYSTEM Sensitivity 2mV~5V/div, 11 step in 1-2-5 sequence Sensitivity Accuracy 3% (5div at the center of display) Vernier Vertical Sensitivity Continuously variable to 1/2.5 or less of panel-indicate value Bandwidth(-3dB) DC~100MHz(2mV/div:DC~20MHz) Rise Time 3.5ns (2mV/div:17.5ns) Signal Delay Leading edge can be monitored Max. Input Voltage 400V(DC+AC peak) at 1kHz or less Input Coupling AC, DC, GND Input Impedance 1MÙ±2% // approx. 25pF Vertical Mode CH1,CH2,DUAL(CHOP/ALT), ADD, CH2 INV. Bandwidth Limited 20MHz Common-Mode Rejection Ratio 50:1 or better at 50kHz Dynamic Range 8 div at 100MHz HORIZONTAL SYSTEM Horizontal Modes MAIN(A), ALT, DELAY(B) A(main) Sweep Time 50ns~0.5s/div, continuously variable (UNCAL) B(delay) Sweep Time 50ns~50ms/div Accuracy ±3% (±5% at x 10 MAG) Sweep Magnification x 10 (maximum sweep time 5nS/div) Hold Off Time Variable Delay Time 1µs~5s Delay Jitter Better than 1:20000 Alternate Separation Variable TRIGGER Trigger Modes AUTO, NORM,TV Trigger Source CH1, CH2, LINE, EXT Trigger Coupling AC, DC, HFR, LFR Trigger Slope "+" or "-" polarity or TVsync polarity Trigger Sensitivity Mode Frequency INT EXT AUTO 10Hz~20MHz 20MHz~100MHz 0.35div 1.5div 50mV 150mV NORM DC~20MHz 20MHz~100MHz 0.35div 1.5div 50mV 150mV TV sync singnal 1div 200mVpp TV sync TV-V, TV-H Max. External Input Voltage 400V(DC+AC peak) at 1kHz External Input Impedance 1MÙ±5% // approx.25pF X-Y OPERATION Mode X-axis: selectable CH1, CH2, EXT Y-axis: selectable CH1, CH2, CH1 and CH2 Sensitivity Accuracy 2mV~5V/div±3% ; EXT : 0.1V/div±5% X-axis Bandwidth DC~500kHz(-3dB) Phase Error 3° or less from DC~50kHz OUTPUT SIGNAL Trigger Signal Output Voltage: approx. 25mV/div into 50Ù Frequency response : DC ~ 10MHz Calibrator Output 1kHz Squarewave, 2Vpp±2% CURSOR READOUT FUNCTION Cursor Measurement Function ÄV, ÄV%, ÄVdB, ÄT, 1/ ÄT, ÄT%, Äè Cursor Resolution 1/100 DIV Effective Cursor Range Vertical: ±3div ; Horizontal: ±4 div Panel Setting Display Vertical: V/div(CH1,CH2),UNCAL,ALT/CHOP/ADD,INV, probe factor,AC/DC/GND Horizontal: s/div(MTB, DTB), UNCAL, x 10MAG, delay time , HO Trigger: source, coupling, slope, level, TV-V, TV-H Others: X-Y, lock, save/recall MEM 0-9 SPECIAL FUNCTION TIME/DIV Auto Range Provided Panel Setting Save & Recall 10 sets Panel Setups Lock Provided POWER SOURCE AC 100V/120V/230V±10% , 50/60Hz     ACCESSORIES   Instruction manual x 1 Power cord x 1 LF-210E Probe (10:1/1:1) x 2 DIMENSIONS & WEIGHT 310(W) x 150(H) x 455(D) mm Approx. 9kg