 |
Caracteristicas
| Caracteristicas |
Ancho de Banda de 200MHz, Dos Canales, con Retardo en el Barrido
10 Configuraciones que se pueden almacenar en memoria para desde el panel frontal llamarlas o salvarlas
Base de Tiempo con Autorango
Cursores y Lecturas en Pantalla con 7 Mediciones
Capacidad Bloqueo de los controles digitales del panel fontal
Alarma de Buzzer
Indicadores LED
Sincronizacion con disparo de TV
Senal de salida de disparo (Trigger Signal Output)
Entrada de modulacion del eje - Z (intensidad del trazo)
Tecnologia SMD Alta Estabilidad y Confiabilidad | |
|
CRT |
| Type |
6-inch rectangular type with internal graticule;
0%, 10%, 90% and 100% markers
8 x 10 div (1 div = 1 cm) |
| Accelerating Potential |
14 kV approx. |
| Illumination |
Continuously adjustable |
| Z-axis input |
Coupling : DC
Sensitivity: 5V or more
Maximum input voltage : 30V (DC + AC peak) at 1kHz or less
Bandwidth : DC ~ 5 MHz |
|
VERTICAL SYSTEM |
| Sensitivity |
2mV~5V/div, 11 step in 1-2-5 sequence |
| Sensitivity Accuracy |
…3% (5div at the center of display) |
| Vernier Vertical Sensitivity |
Continuously variable to 1/2.5 or less of panel-indicated value |
| Bandwidth(-3dB) |
DC~200MHz (5mV/div:DC~150MHz) ; (2mV/div:DC~20MHz) |
| Rise Time |
1.75ns (5mV/div:2.33ns, 2mV/div:17.5ns) |
| Signal Delay |
Leading edge can be monitored |
| Max. Input Voltage |
400V(DC+AC peak) at 1kHz or less |
| Input Coupling |
AC, DC, GND |
| Input Impedance |
1MĦ }2% // approx. 25pF |
| Vertical Mode |
CH1,CH2,DUAL(CHOP/ALT), ADD, CH2 INV. |
| Bandwidth Limited |
20MHz |
| Common-Mode Rejection Ratio |
50:1 or better at 50kHz |
| Dynamic Range |
8 div at 100MHz; 5div at 200MHz |
|
HORIZONTAL SYSTEM |
| Horizontal Modes |
MAIN(A), ALT, DELAY(B) |
| A(main) Sweep Time |
20ns~0.5s/div, continuously variable (UNCAL) |
| B(delay) Sweep Time |
20ns~50ms/div |
| Accuracy |
}3% ( }5% at x 10 MAG) |
| Sweep Magnification |
x 10 (maximum sweep time 2ns/div) |
| Hold Off Time |
Variable |
| Delay Time |
1ƒÊs~5s |
| Delay Jitter |
Better than 1:20000 |
| Alternate Separation |
Variable |
|
TRIGGER |
| Trigger Modes |
AUTO, NORM,TV |
| Trigger Source |
CH1, CH2, LINE, EXT, EXT/10 |
| Trigger Coupling |
AC, DC, HFR, LFR, NR |
| Trigger Slope |
"+" or "-" polarity or TVsync polarity |
| Trigger Sensitivity |
| Mode |
Frequency |
INT |
EXT |
EXT/10 |
| AUTO |
10Hz~20MHz
20MHz~200MHz |
0.35div
1.5div |
50mV
150mV |
500mV
1.5V |
| NORM |
DC~20MHz
20MHz~200MHz |
0.35div
1.5div |
50mV
150mV |
500mV
1.5V |
| TV |
sync signal |
1div |
200mVpp |
2Vpp | |
| Trigger Level Range |
INT: }4div or more; EXT: }0.4V or more; EXT/10: }4V or more |
|
TV Triggering |
Mode:TV-V, TV-H, TV-LINE |
| TV-Line Selection |
| Standard |
Field 1 |
Field 2 |
| NTSC (525H) |
1H ~ 263H |
1H ~ 262H |
| PAL (625H) |
1H ~ 313H |
1H ~ 312H |
| SECAM (625H) | |
| Max. External Input Voltage |
400V(DC+AC peak) at 1kHz |
| External Input Impedance |
1MĦ}5% // approx.25pF |
|
X-Y OPERATION |
| Mode |
X-axis: selectable CH1, EXT, EXT/10
Y-axis: selectable CH1, CH2, CH1 and CH2 |
| Sensitivity Accuracy |
2mV~5V/div}3%
EXT : 0.1V/div}5%
EXT/10 : 1V/div}5% |
| X-axis Bandwidth |
DC~500kHz(-3dB) |
| Phase Error |
3‹ or less from DC~50kHz |
|
OUTPUT SIGNAL |
| Trigger Signal Output |
Voltage: approx. 25mV/div into 50Ħ
Frequency response : DC ~ 10MHz |
| Calibrator Output |
1kHz Square wave, 2Vpp}2% |
|
CURSOR READOUT FUNCTION |
Cursor Measurement Function
|
ĢV, ĢV%, ĢVdB, ĢT, 1/ ĢT, ĢT%, ĢĮ |
| Cursor Resolution |
1/100 DIV |
| Effective Cursor Range |
Vertical: }3div ; Horizontal: }4 div |
| Panel Setting Display |
Vertical: V/div(CH1,CH2),UNCAL,ALT/CHOP/ADD,INV, probe factor,AC/DC/GND
Horizontal: s/div(MTB, DTB), UNCAL, x 10MAG, Delay time, Hold-off
Trigger: source, coupling, slope, level, TV-V, TV-H
Others: X-Y, lock, save/recall MEM 0-9 |
|
AUTO MEASUREMENT FUNCTION
|
| Parameter Function |
FREQ, PERIOD,}WIDTH,}DUTY (+ or - polarity selected by trigger slope) |
| Display Digits |
Max. 6-digits, decimal |
| Frequency Range |
50Hz ~ 200MHz |
| Accuracy |
1kHz ~ 200MHz : }0.01% ; 50Hz ~ 1kHz : }0.05% |
| Measuring Sensitivity |
> 2 div (Measuring source selected from CH1 and Ch2 as synchronous signal sources) |
|
SPECIAL FUNCTION |
| Auto Set |
Input Channel : CH1, CH2
Frequency Response 50Hz ~ 50MHz |
| Panel Setting Save & Recall |
10 sets |
| Panel Setups Lock |
Provided |
| POWER SOURCE |
|
|
AC 100V/120V/230V}10% , 50/60Hz |
|
ACCESSORIES
|
|
User manual x 1
Power cord x 1
GTP-250A Probe (10:1/1:1) x 2 |
| DIMENSIONS & WEIGHT |
|
|
310(W) x 150(H) x 470(D) mm
Approx. 9kg |
|
|
|
 |
|
 |
|
|
|
Home
