Features & Benefits
A621
- AC - 5 Hz to 50 kHz
- 100 mA to 2000 A peak
- For DMM's and Oscilloscopes
- Clamp On
A622
- AC/DC - 100 kHz
- 50 mA to 100 A peak
- For DMM's and Oscilloscopes
Applications
- Motor Drives
- Inverters
- Power Supplies
- Avionics
The A600 Series current probes high-value current probes are specifically designed to support measurements you make with your DMM, TekMeter® or oscilloscope*1.
A621 2000 Amp AC Current Probe/BNC
This industrial style clamp-on probe has a BNC connector and may be used with a shrouded banana plug adapter*1 so it can be used on digital multimeters, TekMeter, and scopes. The A621 can measure AC currents from 100 mA to 2000 A peak over a frequency range of 5 Hz to 50 kHz. It provides a 1 mV, 10 mV, or 100 mV output for each Amp measured.
A622
A622 100 Amp AC/DC Current Probe/BNC
This "long nose" style clamp-on probe uses a Hall Effect current sensor to provide a voltage output to oscilloscopes. It has a BNC connector and may be used with a shrouded banana plug adapter*1 so it can also be used on digital multimeters, TekMeter, and scopes. The A622 can measure AC/DC currents from 50 mA to 100 A peak over a frequency range of DC to 100 kHz. It provides 10 mV or 100 mV output for each Amp measured.
Probe Compatibility Chart
|
Part # |
Description |
DMM100*1 |
DMM200*1 |
DMM910*1 |
THS700*1 |
TX3/TX1*1 |
|
A621 |
AC Current Probe, 2000 A |
Yes |
Yes |
Yes |
Yes |
yes |
|
A622 |
AC/DC Current Probe, 100 A |
Yes |
Yes |
Yes |
Yes |
yes |
Calibración
