Tektronix AFG3101 Generador Arbitrario de 100MHz 1 Canal con USB, GPIB y LAN

Características y beneficios

Formas de onda de hasta 100 MHz
Formas de onda arbitrarias de 14 bits, 1 GS/s
Amplitud de hasta 10 V_p-p con una carga de 50 Ω
La pantalla de 5,6" proporciona una gran confianza en los ajustes y en el aspecto final de la forma de onda
El interfaz intuitivo y en varios idiomas ahorra el tiempo de configuración
Generación de pulsos con ajuste de los tiempos de subida/bajada
Modulaciones FM, PM, FSK y PWM
Barrido de frecuencia y generación de trenes de pulsos
Modelo de un canal
El conector USB del panel frontal permite almacenar formas de onda en dispositivos externos de memoria
Interfaces: USB, GPIB and LAN
LabVIEW and LabWindows/IVI-C drivers

Aplicaciones

Diseño y prueba electrónicos
Simulación de sensor
Pruebas de funcionamiento
Enseñanza y formación

Descripción del producto

Su incomparable rendimiento, versatilidad, funcionamiento intuitivo y precio asequible hacen que los generadores de funciones, de formas de ondas arbitrarias y de pulsos de la serie AFG3000 sean los instrumentos más útiles del mercado al que van dirigidos.

Versatilidad y rendimiento superior

Los usuarios pueden elegir entre 12 formas de onda estándar distintas. Las formas de onda arbitrarias se pueden generar con una longitud de hasta 128 K a velocidades de muestreo elevadas. En el caso de la generación de pulsos, el tiempo de transición de los flancos de subida y bajada se pueden ajustar de manera independiente. Las señales externas se pueden conectar y añadir a la señal de salida. Los modelos de dos canales pueden generar dos señales idénticas o completamente distintas. Todos los instrumentos disponen de una base de tiempo altamente estable con una deriva de tan solo ±1 ppm al año.

La interfaz de usuario es muy intuitiva y presenta al usuario más información de forma simultánea

Una pantalla de gran tamaño muestra simultáneamente los parámetros más relevantes de la forma de onda seleccionada así como su representación gráfica. Esto permite confiar plenamente en los ajustes de la señal y concentrarse en la tarea que se está llevando a cabo. Las teclas de acceso rápido proporcionan acceso directo a los parámetros y funciones utilizados con más frecuencia. Se pueden seleccionar otras teclas según su conveniencia a través de una serie de menús claramente estructurados. Esto reduce el tiempo que se emplea en aprender y más tarde en tratar de recordar el funcionamiento del instrumento. Por otra parte, el aspecto es idéntico al de los osciloscopios más populares del mundo, los TDS3000.

Incluye el software ArbExpress™ para poder crear fácilmente formas de onda

Con este programa para PC, las formas de onda se pueden importar perfectamente desde cualquier osciloscopio Tektronix; o bien, se pueden definir utilizando las funciones estándar, el editor de ecuaciones y operaciones matemáticas.

Characteristics

AFG3000 Series Characteristics

Model	AFG3011	AFG3021B / AFG3022B	AFG3101 / AFG3102	AFG3251 / AFG3252
Channels	1	1 / 2	1 / 2	1 / 2
Waveforms	Sine, Square, Pulse, Ramp, Triangle, Sin(x)/x, Exponential Rise & Decay, Gaussian, Lorentz, Haversine, DC, Noise
Sine Wave	1 µHz to 10 MHz	1 µHz to 25 MHz	1 µHz to 100 MHz	1 µHz to 240 MHz
Sine Wave in Burst Mode	1 µHz to 5 MHz	1 µHz to 12.5 MHz	1 µHz to 50 MHz	1 µHz to 120 MHz
Effective maximum frequency out	10 MHz	25 MHz	100 MHz	240 MHz
Amplitude Flatness (1 V_p-p)
<5 MHz	±0.15 dB	±0.15 dB	±0.15 dB	±0.15 dB
5 MHz to 10 MHz	±0.3 dB	—	—	—
5 MHz to 20 MHz	—	±0.3 dB	±0.3 dB	±0.3 dB
20 MHz to 25 MHz	—	±0.5 dB	±0.3 dB	±0.3 dB
25 MHz to 100 MHz	—	—	±0.5 dB	±0.5 dB
100 MHz to 200 MHz	—	—	—	±1.0 dB
200 MHz to 240 MHz	—	—	—	±2.0 dB
Harmonic Distortion (1 V_p-p)
10 Hz to 20 kHz	<–60 dBc	<–70 dBc	<–60 dBc	<–60 dBc
20 kHz to 1 MHz	<–55 dBc	<–60 dBc	<–60 dBc	< -60 dBc
1 MHz to 5 MHz	<–45 dBc	<–50 dBc	<–50 dBc	<–50 dBc
5 MHz to 10 MHz	<–45 dBc	<–50 dBc	<–37 dBc	<–37 dBc
10 MHz to 25 MHz	—	<–40 dBc	<–37 dBc	<–37 dBc
>25 MHz	—	—	<–37 dBc	<–30 dBc
THD	<0.2% (10 Hz – 20 kHz, 1 V_p-p)
Spurious (1 V_p-p)
10 Hz to 1 MHz	<–60 dBc	<–60 dBc	<–60 dBc	<–50 dBc
1 MHz to 10 MHz	<–50 dBc	—	—	—
1 MHz to 25 MHz	—	<–50 dBc	<–50 dBc	<–47 dBc
>25 MHz	—	—	<–50 dBc + 6 dBc/octave	<–47 dBc + 6 dBc/octave
Phase Noise, typical	<–110 dBc/Hz at 10 MHz, 10 kHz offset, 1 V_p-p	<–110 dBc/Hz at 20 MHz, 10 kHz offset, 1 V_p-p
Residual Clock Noise	–63 dBm	–63 dBm	–57 dBm	–57 dBm
Square Wave	1 µHz to 5 MHz	1 µHz to 12.5 MHz	1 µHz to 50 MHz	1 µHz to 120 MHz
Rise/Fall Time	≤50 ns	≤18 ns	≤5 ns	≤2.5 ns
Jitter (rms), typical	500 ps	500 ps	200 ps	100 ps
Ramp Wave	1 µHz to 100 kHz	1 µHz to 250 kHz	1 µHz to 1 MHz	1 µHz to 2.4 MHz
Linearity, typical	≤0.2% of peak output	≤0.1% of peak output	≤0.15% of peak output	≤0.2% of peak output
Symmetry	0.0% to 100.0%.	0.0% to 100.0%.
Pulse Wave	1 mHz to 5 MHz	1 mHz to 12.5 MHz	1 mHz to 50 MHz	1 mHz to 120 MHz
Pulse Width	80.00 ns to 999.99 s	30.00 ns to 999.99 s	8.00 ns to 999.99 s	4.00 ns to 999.99 s
Resolution	10 ps or 5 digits
Pulse Duty	0.001% to 99.999% (Limitations of Pulse Width Apply)
Edge Transition Time	50 ns to 625 s	18 ns to 625 s	5 ns to 625 s	2.5 ns to 625 s
Resolution	10 ps or 4 digits	10 ps or 4 digits
Lead Delay
Range	(Continuous Mode): 0 ps to Period (Triggered/Gated Burst Mode): 0 ps to Period – [Pulse Width + 0.8 *(Leading Edge Time + Trailing Edge Time)]
Resolution	10 ps or 8 digits
Overshoot, typical	<5%
Jitter (rms, typical)	500 ps	500 ps	200 ps	100 ps
Other Waveforms	1 µHz to 100 kHz	1 µHz to 250 kHz	1 µHz to 1 MHz	1 µHz to 2.4 MHz
Noise Bandwidth (–3 dB)	10 MHz	25 MHz	100 MHz	240 MHz
Noise Type	White Gaussian
DC (into 50 Ω)	–10 V to +10 V	–5 V to +5 V	–5 V to +5 V	–2.5 V to +2.5 V
Arbitrary Waveforms	1 mHz to 5 MHz	1 mHz to 12.5 MHz	1 mHz to 50 MHz	1 mHz to 120 MHz
Arbitrary Waveforms in Burst Mode	1 mHz to 2.5 MHz	1 mHz to 6.25 MHz	1 mHz to 25 MHz	1 mHz to 60 MHz
Effective Analog Bandwidth (–3 db)	8 MHz	34 MHz	100 MHz	225 MHz
Non-volatile memory	4 waveforms	4 waveforms	4 waveforms	4 waveforms
Memory: Sample rate	2 to 128 K: 250 MS/s	2 to 128 K: 250 MS/s	>16 K to 128 K: 250 MS/s 2 to 16 K: 1 GS/s	>16 K to 128 K: 250 MS/s 2 to 16 K: 2 GS/s
Vertical resolution	14 bits	14 bits	14 bits	14 bits
Rise Time/Fall Time	≤80 ns	≤20 ns	≤8 ns	≤3 ns
Jitter (rms)	4 ns	4 ns	1 ns at 1 GS/s 4 ns at 250 MS/s	500 ps at 2 GS/s 4 ns at 250 MS/s
Amplitude, 50 Ω Load	20 mV_p-p to 20 V_p-p	10 mV_p-p to 10 V_p-p	20 mV_p-p to 10 V_p-p	≤200 MHz: 50 mV_p-p to 5 V_p-p >200 MHz: 50 mV_p-p to 4 V_p-p
Amplitude, Open Circuit	40 mV_p-p to 40 V_p-p	20 mV_p-p to 20 V_p-p	40 mV_p-p to 20 V_p-p	≤200 MHz: 100 mV_p-p to 10 V_p-p >200 MHz: 100 mV_p-p to 8 V_p-p
Accuracy	±(2% of setting +2 mV) (1 kHz sine wave, 0 V offset, >20 mV_p-p amplitude)	±(1% of setting +1 mV) (1 kHz sine wave, 0 V offset, >10 mV_p-p amplitude)
Resolution	0.1 mV_p-p, 0.1 mV_RMS, 1 mV, 0.1 dBm or 4 digits
Units	V_p-p, V_RMS, dBm (sine wave only)
Output Impedance	50 Ω
Load Impedance Setting	Selectable: 50 Ω, 1Ω to 10.0 kΩ, High Z (adjusts displayed amplitude according to selected load impedance)
Isolation	42 Vpk maximum to earth
Short-Circuit Protection	Signal outputs are robust against permanent shorts against floating ground
External Voltage Protection	To protect signal outputs against external voltages use fuse adapter 013-0345-00
DC Offset Range, 50 Ω Load	±(10 V_pk – Amplitude_pp/2)	±(5 V_pk --Amplitude_pp/2)	±5 V_pk DC	±2.5 V_pk DC
DC Offset Range, Open Circuit	±(20 V_pk – Amplitude_pp/2)	±(10 V_pk --Amplitude_pp/2)	±10 V_pk DC	±5 V_pk DC
Accuracy	±(2% of \|setting\| + 10 mV + 1% of amplitude (V_p-p))	±(1% of \|setting\| + 5 mV + 0.5% of amplitude (V_p-p))
Resolution	1 mV

Modulation

AM, FM, PM

Carrier Waveforms	All, except Pulse, Noise and DC
Source	Internal/External
Internal Modulating Waveform	Sine, square, ramp, noise, ARB (AM: maximum waveform length 4,096; FM/PM: maximum waveform length 2,048)
Internal Modulating Frequency	2 mHz to 50.00 kHz
AM Modulation Depth	0.0% to +120.0%
Min FM Peak Deviation	DC
Max FM Peak Deviation	See chart, below

Modulation: Max FM Peak Deviation

	AFG3011	AFG3021B / AFG3022B	AFG3101 / AFG3102	AFG3251 / AFG3252
Sine	5 MHz	12.5 MHz	50 MHz	120 MHz
Square	2.5 MHz	6.25 MHz	25 MHz	60 MHz
ARB	2.5 MHz	6.25 MHz	25 MHz	60 MHz
Others	50 kHz	125 kHz	500 kHz	1.2 MHz

PM Phase Deviation - 0.0° to +180.0°.

Frequency Shift Keying

Carrier Waveforms	All, except Pulse, Noise, and DC
Source	Internal/External
Internal Modulating Frequency	2 mHz to 1.000 MHz
Number of Keys	2

Pulse Width Modulation

Carrier Waveform	Pulse
Source	Internal/External
Internal Modulating Waveform	Sine, square, ramp, noise, ARB (maximum waveform length 2,048)
Internal Modulating Frequency	2 mHz to 50.00 kHz
Deviation	0% to 50.0% of pulse period

Sweep

Waveforms	All, except Pulse, Noise, and DC
Type	Linear, logarithmic
Sweep Time	1 ms to 300 s
Hold/Return Time	0 ms to 300 s
Max Total Sweep Time	300 s
Resolution	1 ms or 4 digits
Total Sweep Time Accuracy, typical	≤0.4%
Min Start/Stop Frequency	All except ARB: 1 µHz, ARB: 1 mHz
Max Start/Stop Frequency	See chart, below

Sweep: Max Start/Stop Frequency

	AFG3011	AFG3021B / AFG3022B	AFG3101 / AFG3102	AFG3251 / AFG3252
Sine	10 MHz	25 MHz	100 MHz	240 MHz
Square	5 MHz	12.5 MHz	50 MHz	120 MHz
ARB	5 MHz	12.5 MHz	50 MHz	120 MHz
Others	100 kHz	250 kHz	1 MHz	2.4 MHz

Burst

Waveforms	All, except Noise and DC
Type	Triggered, gated (1 to 1,000,000 cycles or Infinite)
Internal Trigger Rate	1 μs to 500.0 s
Gate and Trigger Sources	Internal, external, remote interface

Auxiliary Inputs

Modulation Inputs Channel 1, Channel 2
Input Range	All except FSK: ±1 V FSK: 3.3 V logic level
Impedance	10 kΩ
Frequency Range	DC to 25 kHz (122 KS/s)
External Triggered/Gated Burst Input
Level	TTL compatible
Impedance	10 kΩ
Pulse Width	100 ns minimum
Slope	Positive/Negative, selectable
Trigger Delay	0.0 ns to 85.000 s
Resolution	100 ps or 5 digits
Jitter (rms), typical	Burst: <500 ps (Trigger input to signal output)
10 MHz Reference Input
Impedance	1 kΩ, AC coupled
Required Input Voltage Swing	100 mV_p-p to 5 V_p-p
Lock Range	10 MHz ±35 kHz
External Channel 1 Add Input	AFG3101, AFG3102, AFG3251, AFG3252 only
Impedance	50 Ω
Input Range	–1 V to +1 V (DC + peakAC)
Bandwidth	DC to 10 MHz (–3 dB) at 1 V_p-p

Auxiliary Outputs

Channel 1 Trigger Output
Level	Positive TTL level pulse into 1 kΩ
Impedance	50 Ω
Jitter (rms), typical	AFG3011/21B/22B: 500 ps AFG3101/02: 200 ps AFG3251/52: 100 ps
Max Frequency	4.9 MHz (4.9 MHz to 50 MHz: a fraction of the frequency is output; >50 MHz: no signal is output)
10 MHz Reference Out	AFG3101, AFG3102, AFG3251, AFG3252 only
Impedance	50 Ω, AC coupled
Amplitude	1.2 V_p-p into 50 Ω load

Common Characteristics

Frequency Setting Resolution	1 μHz or 12 digits
Phase (except DC, Noise, Pulse)
Range	–180° to +180°
Resolution	0.01° (sine), 0.1° (other waveforms)
Internal Noise Add	When activated, output signal amplitude is reduced to 50%
Level	0.0% to 50% of amplitude (V_p-p) setting
Resolution	1%
Main Output	50 Ω
Effective Frequency Switching Speed	2 ms via remote control (sequencing not available)
Internal Frequency Reference
Stability	All except ARB: ±1 ppm, 0 °C to 50 °C ARB: ±1 ppm ± 1 µHz, 0 °C to 50 °C
Aging	±1 ppm per year
Remote Programming	GPIB, LAN 10BASE-T / 100BASE-TX, USB 1.1 Compatible with SCPI-1999.0 and IEEE 488-2 standards.
Configuration Times, typical	USB	LAN	GPIB
Function Change	95 ms	103 ms	84 ms
Frequency Change	2 ms	19 ms	2 ms
Amplitude Change	60 ms	67 ms	52 ms
Select User ARB	88 ms	120 ms	100 ms
Data Download Time for 4000 point waveform data, typical	20 ms	84 ms	42 ms
Power Source	100 to 240 V, 47 to 63 Hz, or 115 V, 360 to 440 Hz
Power Consumption	Less than 120 W
Warm-up Time, typical	20 minutes
Power On Self Calibration, typical	<16 s
Acoustic Noise, typical	<50 dBA
Display	AFG3021B: 5.6" Monochrome LCD
	All others: 5.6" Color LCD
User Interface and Help Language	English, French, German, Japanese, Korean, Simplified and Traditional Chinese, Russian (user selectable)

Physical Characteristics

Benchtop Configuration

Dimensions	mm	in.
Weight	kg	lbs.
Height	156.3	6.2
Width	329.6	13.0
Depth	168.0	6.6
Net	4.5	9.9
Shipping	5.9	12.9

Environmental & Safety Characteristics

Temperature
Operating	0 °C to +50 °C
Nonoperating	–30 °C to +70 °C
Humidity
Operating	At or below +40 °C: ≤80% >+40 °C to 50 °C: ≤60%
Altitude	Up to 10,000 feet/3,000 m
EMC Compliance
European Union	EN 61326:1997 Class A EN 61000-3-2:2000, and EN 61000-3-3:1995 IEC 61000-4-2:1999, -4-3:2002, -4-4:2004, -4-5:2005, -4-6:2003, -4-11:2004
Australia	EN 61326:1997
Safety	UL 61010-1:2004 CAN/CSA C22.2 No. 61010-1:2004 IEC 61010-1:2001

Ordering Information

AFG3011, AFG3021B, AFG3022B, AFG3101, AFG3102, AFG3251, AFG3252

Arbitrary/Function Generator

Includes: Quick-start user manual, power cord, USB cable, CD-ROM with programmer manual, service manual, LabView and IVI drivers, CD-ROM with ArbExpress™ software, NIST-traceable calibration certificate. Please specify power plug when ordering.

International Power Plugs

Opt. A0	North America power
Opt. A1	Universal EURO power
Opt. A2	United Kingdom power
Opt. A3	Australia power
Opt. A5	Switzerland power
Opt. A6	Japan power
Opt. A10	China power
Opt. A11	India power
Opt. A99	No power cord or AC adapter

Manual Options

Note: Includes front panel overlay.

Opt. L0	English (071-1631-xx)
Opt. L1	French (071-1632-xx)
Opt. L2	Italian (071-1669-xx)
Opt. L3	German (071-1633-xx)
Opt. L4	Spanish (071-1670-xx)
Opt. L5	Japanese (071-1634-xx)
Opt. L7	Simple Chinese (071-1635-xx)
Opt. L8	Traditional Chinese (071-1636-xx)
Opt. L9	Korean (071-1637-xx)
Opt. L10	Russian (071-1638-xx)
Opt. L99	No manual

Service

Opt. C3	Calibration Service 3 Years
Opt. C5	Calibration Service 5 Years
Opt. CA1	Single calibration event or coverage for the designated calibration interval, whichever comes first
Opt. D1	Calibration Data Report
Opt. D3	Calibration Data Report 3 Years (with Option C3)
Opt. D5	Calibration Data Report 5 Years (with Option C5)
Opt. R5	Repair Service 5 Years

Warranty

Three year warranty on parts and labor.

Recommended Accessories

Rackmount Kit	RM3100
Fuse adapter, BNC-P to BNC-R	013-0345-00
Fuse set, 3 pcs, 0.125 A.	159-0454-00
BNC cable shielded, 3 ft.	012-0482-00
BNC cable shielded, 9 ft.	012-1256-00
GPIB cable, double shielded	012-0991-00