Osciloscopios de Almacenamiento Digital Portables con Bateria

TPS2012 • TPS2014 • TPS2024

Caracteristicas y Beneficios

• Anchos de banda de 100 MHz (TPS2012/TPS2014) y 200 MHz (TPS2024)
• Velocidad de muestreo de hasta 2 GS/s de tiempo real
• 2 (TPS2012) o 4 (TPS2014/TPS2024) canales totalmente aislados y flotantes, ademas la conexion de disparo externo tambien esta aislado
• Hasta 8 horas de operacion continua con dos baterias instaladas (solo se incluye una, la segunda es opcional), se pueden intercambiar mientras el instrumento esta funcionando para tener libertad de corriente de AC virtualmente ilimitada
• Software Opcional para aplicaciones de potencia que ofrece el mas amplio rango de mediciones de potencia en este rango de precio
• Documenta y analiza los resultados de la medicion con el software OpenChoice® o a traves de la tarjeta de almacenamiento CompactFlash® 
• La funcion FFT es estandar en todos los modelos
• Disparos avanzados para capturar rapidamente los eventos de interes
• Operacion facil con perillas de estilo analogico e interface de usuario multi-idioma
• Simplifica la configuracion del intrumento con el menu de AUTOSET, memorias para formas de onda y configuraciones, ayuda interconstruida sesitiva al contexto
• Ajuste el osciloscopio a su ambiente de trabajo con la luz de fondo backlit en todos los botones de menu y pantalla y controles de contraste y brillantes de la pantalla 
• 11 mediciones automaticas

Aplicaciones

• Diseño de potencia industrial, servicio, instalacion y mantenimiento
• Diseño electronico avanzado, servicio, depuracion, instalacion y mantenimiento
• Prueba y diseño automotriz
• Educacion

TPS2000 Series Oscilloscopes Deliver Powerful Productivity from Bench to Field

As an engineer or technician, you must often make floating, or differential, measurements. You face faster edges and clocks due to the migration of higher performance technologies to widely implemented electronic systems and subsystems, with the pressure to conform to customer specifications or industry requirements.

And you may need to develop and test designs in a variety of challenging environments that demand versatility.

You can quickly tackle these tough challenges to speed the design, troubleshooting, installation, and maintenance of components and systems with the world's first 4-isolated-channel, full featured, battery-powered oscilloscope – the TPS2000 Series.

Make Floating and Differential Measurements – Quickly, Accurately, Affordably

Make floating and differential measurements much more quickly and accurately, and speed verification of power supply performance, complex control circuits and the effects of neutral current for differential voltages, up to 30 V_RMS floating on four channels simultaneously, when the TPS2000 Series is paired with its standard P2220 passive probe.

Easily perform these measurements up to 600 V_RMS CAT II (or 300 V_RMS CAT III) floating when the oscilloscope is coupled with its optional P5120 passive, high-voltage probe.

Accurately characterize rise and fall times and other waveform parameters in circuits with different low levels or ground references, while removing ground loop interference, with just 37 pf capacitance to chassis on each of four isolated channels.

Innovative IsolatedChannel™ technology makes these measurements possible - all designed with your safety in mind.

Speed the Design and Test of Industrial Power Systems and Subsystems

The TPS2000 Series easily addresses the unique challenges that plague industrial power designers and technicians. You regularly confront high voltages and currents, and must often make potentially hazardous floating measurements. With the TPS2000 Series' power bundle (TPS2PBND), which includes the P5120 passive, high-voltage probes and TPS2PWR1 power measurement and analysis software, you can use a single instrument to make a broad range of measurements.

Easily evaluate these high voltages and currents, or debug power electronics control circuits, with differential voltages up to 600 V_RMS CAT II (or 300 V_RMS CAT III) floating. Accurately measure three-phase power and circuits with different low levels or ground references.

Quickly perform a broad range of power-specific measurements, such as switching loss, harmonic distortion measurements to the 50th harmonic, and dv/dt and di/dt cursor measurements.

Quickly Debug and Characterize Signals with DRT Sampling Technology

Characterize a wide range of signal types on four channels simultaneously with the TPS2000 Series’ unique digital real-time (DRT) sampling technology. This acquisition technology makes it possible to capture high-frequency information, such as glitches and edge anomalies, that eludes other oscilloscopes in its class, so that you can be sure to get a complete view of your signal to speed debug and characterization.

Easily Analyze and Document Your Measurement Results

Quickly reveal signal interference, cross-talk and the effects of vibration with frequency domain analysis using the TPS2000 Series' standard Fast Fourier Transform (FFT) feature. Easily analyze and document your measurement results with integrated CompactFlash® mass storage or OpenChoice® software.

Correlate Your Measurements from Bench to Lab to Field*¹

Use the TPS2000 Series on your bench, in the lab, or in the field, with the industry’s longest continuous battery life – 8 hours and beyond – in a highly mobile package. Harness the power of virtually unlimited freedom from an AC power source with hot-swappable batteries. Easily correlate measurements between bench, lab, and field with its portability.

*¹ Please refer to Environmental and Safety specifications.

Optimize Your Productivity with Versatility

Intuitively operate the oscilloscope with familiar, analog-style knobs per channel. Reduce your measurement time with features like autoset, autorange, automatic measurements, 10X to 1000X vertical position control, probe check wizard, and context-sensitive help. Effectively work in a variety of challenging environments – from bright daylight to dimly lit areas – using backlit menu buttons and brightness/contrast controls.

Digital Storage Oscilloscopes

TPS2012 • TPS2014 • TPS2024

Characteristics

TPS2000 Series Electrical Characteristics

Feature	TPS2012	TPS2014	TPS2024
Isolated Channels	2	4	4
Bandwidth*1 (MHz)	100	100	200
Sample Rate (GS/s) per channel	1.0	1.0	2.0
Record Length	2.5 K points
Display (1/4 VGA LCD)	Color
Battery Operation	Capacity for two hot-swappable battery packs. One standard battery pack offers 4 hours of battery operation. Optional second battery pack extends battery operation to 8 hours. Continuous battery operation is possible by hot-swapping charged batteries.
Automatic Measurements	11
Isolated External Trigger Input (Impedance Isolated)	Yes
Vertical Resolution	8-bits (normal or with averaging)
Vertical Sensitivity	2 mV to 5 V/div on all models with calibrated fine adjustment
DC Vertical Accuracy	±3%
Vertical Zoom	Vertically expand or compress a live or stopped waveform
Max Input Voltage (1 MΩ)*2	300 VRMS CAT II at BNC signal to BNC shell, 1000 VRMS CAT II at probe tip to earth ground with optional P5120 passive, high-voltage probe
Float Voltage*2	600 VRMS CAT II or 300 VRMS CAT III BNC shell to earth ground, 1200 VRMS CAT II between any two channel commons with each of the channel commons not being more than +/- 600 VRMS from earth ground
Position Range	2 mV to 200 mV/div ±2 V; >200 mV to 5 V/div ±50 V
Bandwidth Limit	20 MHz
Linear Dynamic Range	±5 div
Time Base Range	5 ns to 50 s/div	5 ns to 50 s/div	2.5 ns to 50 s/div
Time Base Accuracy	50 ppm
Input Impedance	1 MΩ ±2 % in parallel with 20 pF
Input Coupling	AC, DC, GND
Horizontal Zoom	Horizontally expand or compress a live or stopped waveform
FFT	Standard
RS-232, Centronics-Parallel Ports	Standard
PC Connectivity	Standard
Integrated CompactFlash® Mass Storage	Standard
Power Measurements	Optional package that offers instantaneous power waveform analysis, waveform analysis, harmonics analysis, switching loss, phase angles, dv/dt and di/dt cursors

*¹ Bandwidth is 20 MHz at 2 mV/div, all models. Bandwidth is 200 MHz typical at 5 mV/div, 200 MHz models only. Bandwidth is 200 MHz typical between 40 °C and 50 °C, 200 MHz models only.

*² Please refer to Environmental and Safety specifications.

Acquisition Modes

Peak Detect - High frequency and random glitch capture. Captures glitches as narrow as 12 ns typical using acquisition hardware at all time/div settings from 5 μs/div to 50 s/div.

Sample - Sample data only.

Average - Waveform averaged, selectable: 4, 16, 64, 128.

Single Sequence - Use the Single Sequence button to capture a single triggered acquisition sequence at a time.

Scan/Roll Mode - At acquisition time base settings of ≥100ms/div .

Trigger System (Main Only)

Trigger Modes - Auto, Normal, Single Sequence.

Trigger Types

Edge (rising or falling) - Conventional level-driven trigger. Positive or negative slope on any input. Coupling selections: AC, DC, Noise Reject, HF Reject, LF Reject.

Video - Trigger on all lines or individual line, odd/even or all fields from composite video, or broadcast standards (NTSC, PAL, SECAM).

Pulse Width (or Glitch) - Trigger on a pulse width less than, greater than, equal to, or not equal to a selectable time limit ranging from 33 ns to 10 sec.

Trigger Source

2-channel model - CH1, CH2, Ext, Ext/5, Ext/10.

4-channel models - CH1, CH2, CH3, CH4, Ext, Ext/5, Ext/10.

Trigger View

Displays trigger signal while trigger view button is depressed.

Trigger Signal Frequency Readout

Provides a frequency readout of the trigger source with 6-digit resolution.

Cursors

Types - Voltage, Time.

Measurements - ΔT, 1/ΔT (frequency), ΔV, dv/dt*³, di/dt*³.

*³ Requires TPS2PWR1 power application package.

Measurement System

Automatic Waveform Measurements - Period, Frequency, +Width, –Width, Rise time, Fall time, Max, Min, Peak-to-Peak, Mean, Cycle RMS.

Waveform Processing

Operators - Add, Subtract, Multiply, FFT.

FFT - Windows: Hanning, Flat Top, Rectangular; 2048 sample points.

Sources -

2-channel models: CH1 - CH2, CH2 - CH1, CH1 + CH2, CH1 × CH2.

4-channel models: CH1 - CH2, CH2 - CH1, CH3 - CH4, CH4 - CH3, CH1 + CH2, CH3 + CH4, CH1 × CH2, CH3 × CH4.

Autoset Menu - Single-button, automatic setup of all channels for vertical, horizontal and trigger systems, with undo autoset.

Autorange - Allows the user to change test points without resetting the oscilloscope.

Autoset Menu for Multiple Signal Types

Signal Type	Autoset Menu Choices
Square wave	Single-cycle, Multi-cycle, Rising or Falling Edge
Sine Wave	Single-cycle, Multi-cycle, FFT Spectrum
Video (NTSC, PAL, SECAM)	Video (NTSC, PAL, SECAM) Field: All, Odd, or Even Line: All or Selectable Line Number

Nonvolatile Storage

Nonvolatile Storage	Standard (with CompactFlash® Mass Storage)
Reference Waveform Display	Two 2500 point reference waveforms
Waveform Storage	96 or more reference waveforms per 8 MB
Setups	4000 or more front panel setups per 8 MB
Screen Images	128 or more screen images per 8 MB (the number of images depends on file format selected)
Save All	12 or more Save All operations per 8 MB. A single Save All operation creates 2 to 9 files (setup, image, plus one file for each displayed waveform).

Display Characteristics

Display - 1/4 VGA, passive color LCD with color on black background with adjustable multi-level contrast and brightness controls.

Interpolation - Sin(x)/x.

Display Types - Dots, vectors.

Persistence - Off, 1 sec, 2 sec, 5 sec, infinite.

Format - YT and XY.

I/O Interface

Printer Port (standard) - Centronics-type Parallel.

Graphics File Formats – TIFF, PCX (PC Paint Brush), BMP (Microsoft Windows), EPS (Encapsulated Postscript) and RLE.

Printer Formats – Bubble Jet, DPU-411, DPU-412, DPU-3445, Thinkjet, Deskjet, Laser Jet, Epson Dot (9- or 24-pin), Epson C60, Epson C80.

Layout – Landscape and Portrait.

RS-232 Port (standard) - 9-pin DTE.

RS-232 Programmability - Full talk/listen modes. Control of all modes, settings and measurements. Baud rate up to 19,200.

Mass Storage CompactFlash® Memory -

• Accepts any Type 1 CompactFlash® card, up to and including 1 GB (card not included).

Built-in Clock/Calendar

OpenChoice PC Communications Software -

• Seamless connection from oscilloscope to PC through RS-232.

• Transfer and save settings, waveforms, measurements, and screen images.

• Includes a Windows desktop data transfer application in addition to convenient Microsoft Word and Excel Toolbar Add-ins.

Environmental and Safety

Temperature -

Operating: 0 °C to +50 °C.

Non-operating: -40 °C to +71 °C.

Humidity - TPS2000 Series oscilloscopes are not intended for use in wet or damp conditions.

Operating:

high: 50 °C / 60% RH.

low: 30 °C / 90% RH.

Non-Operating:

high: 55 °C to 71 °C / 60% RH max wet bulb.

low: 30 °C to 0 °C / < 90% RH max wet bulb.

Altitude -

Operating: up to 3,000 m.

Non-operating: 15,000 m.

Pollution Degree 2 - Do not operate in an environment where conductive pollutants may be present (as defined in IEC61010-1:2001).

Enclosure Rating - IP30: when the CompactFlash® card and power analysis software are installed (as defined in IEC60529:2001)

Electromagnetic Compatibility - Meets the intent of Directive 89/336/EEC. Meets or exceeds: Australian EMC Framework, demonstrated per Emission Standard AS/NZS 2064.1/2.

General Certifications - Russian GOST EMC regulations.

Safety - UL61010-1: 2004. CAN/CSA22.2 No. 1010.1: 2004. EN61010-1: 2001.

Do not float the P2220 probe common lead to >30 V_RMS. Use the P5120 (floatable to 600 V_RMS CAT II or 300 V_RMS CAT III) or similarly rated passive, high-voltage probe or an appropriately rated high-voltage, differential probe when floating the common lead above 30 V_RMS, subject to the ratings of such high-voltage probe.

CAT Ratings

Overvoltage Categories

Category	Examples of Products in this Category
CAT III	Distribution-level mains, fixed installation
CAT II	Local-level mains, appliances, portable equipment
CAT I	Signal levels in special equipment or parts of equipment, telecommunications, electronics

Materials - TPSBAT battery contains less than 8 grams equivalent Lithium.

Physical Characteristics

INSTRUMENT
Dimensions	mm	in.
Width	336.0	13.24
Height	161.0	6.33
Depth	130.0	5.10
Weight	kg	lbs.
Instrument only	2.7	6.0
with 1 battery	3.2	7.0
with 2 batteries	3.7	8.0
INSTRUMENT SHIPPING
Package Dimensions	mm	in.
Width	476.2	18.75
Height	266.7	10.50
Depth	228.6	9.00