 |
 |
 |
|
| Specification |
| General Spec. Display |
3-3/4 digits 4000 counts LCD display |
| Polarity |
Automatic |
| Update Rate |
3 per second nominal |
| Operating Temperature |
0°C to 40°C (32°F to 104°F) |
| Relative Humidity |
Maximum relative humidity 80% for temperature up to 31°C decreasing linearly to 50% relative humidity at 40°C |
| Altitude |
Operating below 2000m |
| Storage Temperature |
-20°C ~ 60°C (-4°F to 140°F), < 80% R.H. (with battery removed) |
| Temperature Coefficient |
Nominal 0.15 x (specified accuracy)/°C @(0°C - 18°C or 28°C - 40°C), or otherwise specified |
| Sensing |
Average sensing |
| Pollution Degree |
2 |
| Safety |
The meter (all versions) is protected, against the users, by double insulation per UL3111-1 (1st Edition), IEC61010-1 (1st Edition) + A1 and A2, CAN/CSA - C22.2 No. 1010.1 - 92 to CAT II 1000V & CAT III 600V.
Protection-reinforced CE Terminals (to COM) ratings: V: Category II 1000 Volts AC & DC, and Category III 600 Volts AC & DC.
A / mAľA: Category III 500 Volts AC and 300 Volts DC. |
Overload Protections (Protection-
reinforced CE) |
ľA & mA: 0.63A/500V, IR200kA, F Fuse
A: 12.5A/500V, IR20kA, F Fuse
V: 1050Vrms, 1450Vpeak
Ω & Others: 600VDC/VAC rms |
E.M.C.
(In an RF field of 3V/m) |
Capacitance function is not specified AC 4.000V range: Total Accuracy = Specified Accuracy + 700 digits AC
400.0ľA range: Total Accuracy = Specified Accuracy + 300 digits
Other function ranges: Total Accuracy = Specified Accuracy + 40 digits Performance above 3V/m is not specified |
| Transient protection |
6.5kV (1.2/50ľs surge) |
| Power Supply |
1.5V AAA Size (NEDA 24A or IEC LR03) battery X 2 |
| Power Consumption |
3.2 mA |
| Typical Low Battery |
Below approx. 2.4V |
| Sleep Mode Timing |
Idle for 30 minutes |
| Sleep Mode Consumption |
360ľA |
| Specification |
| General Spec. Display |
3-3/4 digits 4000 counts LCD display |
| Polarity |
Automatic |
| Update Rate |
3 per second nominal |
| Operating Temperature |
0°C to 40°C (32°F to 104°F) |
| Relative Humidity |
Maximum relative humidity 80% for temperature up to 31°C decreasing linearly to 50% relative humidity at 40°C |
| Altitude |
Operating below 2000m |
| Storage Temperature |
-20°C ~ 60°C (-4°F to 140°F), < 80% R.H. (with battery removed) |
| Temperature Coefficient |
Nominal 0.15 x (specified accuracy)/°C @(0°C - 18°C or 28°C - 40°C), or otherwise specified |
| Sensing |
Average sensing |
| Pollution Degree |
2 |
| Safety |
The meter (all versions) is protected, against the users, by double insulation per UL3111-1 (1st Edition), IEC61010-1 (1st Edition) + A1 and A2, CAN/CSA - C22.2 No. 1010.1 - 92 to CAT II 1000V & CAT III 600V.
Protection-reinforced CE Terminals (to COM) ratings: V: Category II 1000 Volts AC & DC, and Category III 600 Volts AC & DC.
A / mAľA: Category III 500 Volts AC and 300 Volts DC. |
Overload Protections (Protection-
reinforced CE) |
ľA & mA: 0.63A/500V, IR200kA, F Fuse
A: 12.5A/500V, IR20kA, F Fuse
V: 1050Vrms, 1450Vpeak
Ω & Others: 600VDC/VAC rms |
E.M.C.
(In an RF field of 3V/m) |
Capacitance function is not specified AC 4.000V range: Total Accuracy = Specified Accuracy + 700 digits AC
400.0ľA range: Total Accuracy = Specified Accuracy + 300 digits
Other function ranges: Total Accuracy = Specified Accuracy + 40 digits Performance above 3V/m is not specified |
| Transient protection |
6.5kV (1.2/50ľs surge) |
| Power Supply |
1.5V AAA Size (NEDA 24A or IEC LR03) battery X 2 |
| Power Consumption |
3.2 mA |
| Typical Low Battery |
Below approx. 2.4V |
| Sleep Mode Timing |
Idle for 30 minutes |
| Sleep Mode Consumption |
360ľA |
| Specification |
| General Spec. Display |
3-3/4 digits 4000 counts LCD display |
| Polarity |
Automatic |
| Update Rate |
3 per second nominal |
| Operating Temperature |
0°C to 40°C (32°F to 104°F) |
| Relative Humidity |
Maximum relative humidity 80% for temperature up to 31°C decreasing linearly to 50% relative humidity at 40°C |
| Altitude |
Operating below 2000m |
| Storage Temperature |
-20°C ~ 60°C (-4°F to 140°F), < 80% R.H. (with battery removed) |
| Temperature Coefficient |
Nominal 0.15 x (specified accuracy)/°C @(0°C - 18°C or 28°C - 40°C), or otherwise specified |
| Sensing |
Average sensing |
| Pollution Degree |
2 |
| Safety |
The meter (all versions) is protected, against the users, by double insulation per UL3111-1 (1st Edition), IEC61010-1 (1st Edition) + A1 and A2, CAN/CSA - C22.2 No. 1010.1 - 92 to CAT II 1000V & CAT III 600V.
Protection-reinforced CE Terminals (to COM) ratings: V: Category II 1000 Volts AC & DC, and Category III 600 Volts AC & DC.
A / mAľA: Category III 500 Volts AC and 300 Volts DC. |
Overload Protections (Protection-
reinforced CE) |
ľA & mA: 0.63A/500V, IR200kA, F Fuse
A: 12.5A/500V, IR20kA, F Fuse
V: 1050Vrms, 1450Vpeak
Ω & Others: 600VDC/VAC rms |
E.M.C.
(In an RF field of 3V/m) |
Capacitance function is not specified AC 4.000V range: Total Accuracy = Specified Accuracy + 700 digits AC
400.0ľA range: Total Accuracy = Specified Accuracy + 300 digits
Other function ranges: Total Accuracy = Specified Accuracy + 40 digits Performance above 3V/m is not specified |
| Transient protection |
6.5kV (1.2/50ľs surge) |
| Power Supply |
1.5V AAA Size (NEDA 24A or IEC LR03) battery X 2 |
| Power Consumption |
3.2 mA |
| Typical Low Battery |
Below approx. 2.4V |
| Sleep Mode Timing |
Idle for 30 minutes |
| Sleep Mode Consumption |
360ľA |
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Descripcion
13 Features
Measures AC/DC voltage up to 1000V, Current, Resistance, Frequency, Capacitance and Temperature
Audible continuity
Diode Test
Auto and manual ranging
Relative zero mode
Data hold
Peak hold (30ms response time)
Backlight display
Large, easy to read LCD display
BEEP-JACK audible warning against improper connection
Auto power off
|
|
|
|
|
|
|
|
|
