Fluke FLK-TI200 Cámara

Instrumentos:

Para pruebas de:

Inicio > Fluke >

Fluke FLK-TI200 Cámara Termográfica 9HZ/FCA con Kit a3001 FC iFlex®

FLK-TI200-KIT

Vistas alternativas:

Producto Descontinuado

Disponibilidad: Producto Descontinuado
Codigo del Producto: FLK-TI200-9HZ-FCA

Descripcion

Detalle del producto

Ver Hoja de Datos en formato PDF

Manual de usuario en Español

Producto de Reemplazo: Fluke-Ti401-PRO

Fluke Ti200 Thermal Camera

Detailed Specifications
Temperature
Temperature measurement range (not calibrated below -10 °C)	-20 °C to +650 °C (-4 °F to +1202 °F)
Temperature measurement accuracy	± 2 °C or 2 % (at 25 °C nominal, whichever is greater)
On-screen emissivity correction	Yes (by number and table)
On-screen reflected background temperature compensation	Yes
On-screen transmission correction	Yes
Imaging Performance
Image capture frequency	9 Hz refresh rate or 60 Hz refresh rate depending upon model variation
Detector type	Focal Plane Array, uncooled microbolometer, 200 X 150 pixels
Thermal sensitivity (NETD)	≤ 0.075 °C at 30 °C target temp (75 mK)
Total pixels	30,000
Infrared spectral band	7.5 μm to 14 μm (long wave)
Visual (visible light) camera	Industrial performance 5.0 megapixel
Standard Infrared Lens Type
Field of view	24 ° x 17 °
Spatial resolution (IFOV)	2.09 mRad
Minimum focus distance	15 cm (approx. 6 in)
Optional Telephoto Infrared Lens Type
Field of view	12 ° x 9 °
Spatial resolution (IFOV)	1.05 mRad
Minimum focus distance	45 cm (approx. 18 in)
Optional Wide-Angle Infrared Lens Type
Field of view	46 ° x 34 °
Spatial resolution (IFOV)	4.19 mRad
Minimum focus distance	15 cm (approx. 6 in)
Focus Mechanism
LaserSharp™ Auto Focus system	Yes
Advanced manual focus	Yes
Image Presentation
Palettes
Standard	Ironbow, Blue-Red, High Contrast, Amber, Amber Inverted, Hot Metal, Grayscale, Grayscale Inverted
Ultra Contrast™	Ironbow Ultra, Blue-Red Ultra, High Contrast Ultra, Amber Ultra, Amber Inverted Ultra, Hot Metal Ultra, Grayscale Ultra, Grayscale Inverted Ultra
Level and span	Smooth auto-scaling and manual scaling of level and span
Fast auto toggle between manual and auto modes	Yes
Fast auto-rescale in manual mode	Yes
Minimum span (in manual mode)	2.0 °C (3.6 °F)
Minimum span (in auto mode)	3.0 °C (5.4 °F)
IR-Fusion® Information
Picture-in-Picture (PIP)	Yes
Full screen infrared	Yes
AutoBlend™ mode	Yes
Color alarms (temperature alarms)	High-temperature , low-temperature, and isotherm (user-selectable)
Image Capture and Data Storage
Image capture, review, save mechanism	One-handed image capture, review, and save capability
Storage medium	Micro SD Memory Card, on-board flash memory, save-to-USB capability, direct download via USB-to-PC connection
File formats	Non-radiometric (.bmp) or (.jpeg) or fully-radiometric (.is2)
File formats	No analysis software required for non-radiometric (.bmp and jpg) files
Export file formats w/SmartView® software	BMP, DIB, GIF, JPE, JFIF, JPEG, JPG, PNG, TIF, and TIFF
Memory review	Thumbnail view navigation and review selection
Other Time-Saving and Productivity Features
Voice annotation	60 seconds maximum recording time per image; reviewable playback on imager
IR-PhotoNotes™	Yes
Wi-Fi connectivity	Yes, to PC, iPhone®, iPad® and WiFi to LAN*
Text annotation*	Yes
Video recording*	Standard and radiometric
Streaming video	Via USB to PC and HDMI to HDMI compatible screen
Fluke Connect® compatible	Yes (where available)
Auto capture (temperature and interval)*	Yes
Remote control and operation (for special and advanced applications)	No
General Specifications
Operating temperature	-10 °C to +50 °C (14 °F to 122 °F)
Storage temperature	-20 °C to +50 °C (-4 °F to 122 °F) without batteries
Relative humidity	10 % to 95 % non-condensing
Ruggedized touchscreen display (capacitive)	8.9 cm (3.5 in) diagonal landscape color VGA (640 x 480) LCD with backlight
Controls and adjustments	User selectable temperature scale (°C/°F)
	Language selection
	Time/Date set
	Emissivity selection
	Reflected background temperature compensation
	Transmission correction
	User selectable hot spot and cold spot, and center point on the image
	Expandable-contractable Measurement Box with MIN-AVG-MAX temp
	Color alarms
	User selectable backlight setting graphical information display preference
	Graphical information display preference
Software	SmartView® and SmartView Mobile App - full analysis and reporting software included
Batteries	Two lithium ion rechargeable smart battery packs with five-segment LED display to show charge level, all models
Battery life	Four+ hours continuous use per battery pack (assumes 50 % brightness of LCD and average usage)
Battery charge time	2.5 hours to full charge
AC battery charging	Two-bay AC battery charger (110 V ac to 220 V ac, 50/60 Hz) (included), or in-imager charging. AC mains adapters included. Optional 12 V automotive charging adapter. All models
AC operation	AC operation with included power supply (110 V ac to 220 V ac, 50/60 Hz). AC mains adapters included.
Power saving	User selectable sleep and power off modes
Safety standards	UL 61010-1:2012 CAN/CSA-C22.2 No.61010-1-12 IEC 61010-1 3rd Edition (2010)
Electromagnetic compatibility	EN 61326-1:2006 IEC 61326-1:2005
C Tick	IEC/EN 61326-1
US FCC	CFR 47, Part 15 Subpart B Class B
Vibration	0.03 g2/Hz (3.8 grms), 2.5g IEC 68-2-6
Shock	25 g, IEC 68-2-29
Drop	Engineered to withstand 2 meter (6.5 feet) with standard lens
Size (H x W x L)	27.7 cm x 12.2 cm x 16.7 cm (10.9 in x 4.8 in x 6.5 in)
Weight (battery included)	1.04 Kg (2.3 lb)
Enclosure rating	IP54 (protected against dust, limited ingress; protection against water spray from all directions)
Warranty	Two-years (standard), extended warranties are available.
Recommended calibration cycle	Two-years (assumes normal operation and normal aging)
Supported languages	Czech, Dutch, English, Finnish, French, German, Hungarian, Italian, Japanese, Korean, Polish, Portuguese, Russian, Simplified Chinese, Spanish, Swedish, Traditional Chinese, and Turkish

*Coming soon via firmware update. Users notified via SmartView software when available.

Fluke 3000 FC Series Wireless Multimeter

* For all specifications: accuracy is specified for one year after calibration, at operating temperatures of 18 °C to 28 °C, with relative humidity at 0 % to 90 %. Accuracy specifications take the form of ± ([ % of Reading ] + [ Number of least significant digits ]).

Detailed Specifications
AC Voltage
Range ¹	Resolution	Accuracy ² ³ ⁴
		45 Hz to 500 Hz	500 Hz to 1 kHz
600.0 mV	0.1 mV	1.0 % + 3	2.0 % + 3
6.000 V	0.001 V
60.00 V	0.01 V
600.0 V	0.1 V
1000 V	1 V
¹ All AC voltage ranges are specified from 1 % of range to 100 % of range. ² Crest factor of ≤ 3 at full scale up to 500 V, decreasing linearly to crest factor < 1.5 at 1000 V. ³ For non-sinusoidial waveforms, add ± (2 % of reading + 2 % full scale) typical, for crest factor up to 3. ⁴Do not exceed 107 V-Hz.

DC Voltage, Continuity, Resistance, Diode Test and Capacitance
Function	Range	Resolution	Accuracy
mV	600.0 mV	0.1 mV	0.09 % + 2
V	6.000 V	0.001 V	0.09 % + 2
	60.00 V	0.01 V
	600.0 V	0.1 V
	1000 V	1 V	0.15 % + 2
Ω	600 Ω	1 Ω	Meter beeps at < 25 Ω, beeper detects opens or shorts of 250 μs or longer.
Ω	600.0 Ω	0.1 Ω	0.5 % + 2
	6.000 kΩ	0.001 kΩ	0.5 % + 1
	60.00 kΩ	0.01 kΩ
	60.00 kΩ	0.1 kΩ
	600.0 kΩ	0.001 MΩ
	50.00 MΩ	0.01 MΩ	1.5 % + 3
Diode test	2.000 V	0.001 V	1 % + 2
µF	1000 nF	1 nF	1.2 % + 2
	10.00 μF	0.01 μF
	100.0 μF	0.1 μF
	9999 μF¹	1 μF	10 % typical
¹ In the 9999 μF range for measurements to 1000 μF, the measurement accuracy is 1.2 % + 2.

AC and DC Current
Function	Range ¹	Resolution	Accuracy
mA AC (45 Hz to 1 kHz)	60.00 mA	0.01 mA	1.5 % + 3
	400.0 mA ³	0.1 mA
mA DC ²	60.00 mA	0.01 mA	0.5 % + 3
	400.0 mA ³	0.1 mA
¹ All AC current ranges are specified from 5 % of range to 100 % of range. ² Input burden voltage (typical): 400 mA input 2 mV/mA. ³ 400.0 mA accuracy specified up to 600 mA overload.

Frequency
Range	Resolution	Accuracy ¹
99.99 Hz	0.01 Hz	0.1 % + 1
999.9 Hz	0.1 Hz
9.999 kHz	0.001 kHz
99.99 kHz	0.01 kHz
¹ Frequency is specified up to 99.99 kHz in volts and up to 10 kHz in amps.

Input Characteristics
Function	Overload protection		Input impedance (nominal)	Common mode rejection ratio (1 kΩ unbalance)		Normal mode rejection
	1100 V RMS		> 10 MΩ < 100 pF	> 120 dB at DC, 50 Hz or 60 Hz		> 60 dB at 50 Hz or 60 Hz
	1100 V RMS		> 10 MΩ < 100 pF	> 60 dB, DC to 60 Hz
	1100 V RMS		> 10 MΩ < 100 pF	> 120 dB at DC, 50 Hz or 60 Hz		> 60 dB at 50 Hz or 60 Hz
Open circuit test voltage				Full scale voltage		Typical short circuit current
				To 6 MΩ	50 MΩ
	1100 V RMS	< 2.7 V DC		< 0.7 V DC	< 0.9 V DC	< 350 mA
	1100 V RMS	< 2.7 V DC		2.000 V DC		< 1.1 mA

mA Function
Overload Protection	Fused, 44/100 A, 1000 V FAST Fuse
Overload	600 mA overload for 2 minutes maximum, 10 minutes rest minimum

MIN/MAX Recording Accuracy
DC functions	The specified accuracy of the measurement function ± 12 counts for changes > 350 mS in duration.
AC functions	The specified accuracy of the measurement function ± 40 counts for changes > 900 mS in duration.

General Specifications
Maximum voltage between any terminal and earth ground	1000 V DC or AC RMS
Ω fuse protection from A inputs	0.44 A (44/100 A, 440 mA), 1000 V FAST Fuse, Fluke specified part only
Display (LCD)	Update rate: 4/sec Volts, amps, ohms: 6000 counts Frequency: 10,000 counts Capacitance: 1,000 counts
Battery type	Three AA Alkaline batteries, NEDA 15A IEC LR6
Battery life	250 hours minimum
RF communications	2.4 GHZ ISM Band
RF communication range	Open air, unobstructed: Up to 20m Obstructed, sheetrock wall: Up to 6.5m Obstructed, concrete wall, or steel electrical enclosure: Up to 3.5m
Temperature	Operating: -10 °C to 50 °C Storage: -40 °C to 60 °C
Temperature coefficient	0.1 X (specified accuracy) /°C (<18 °C or >28 °C)
Relative humidity	0 % to 90 % (0 °C to 35 °C) 0 % to 75 % (35 °C to 40 °C) 0 % to 45 % (40 °C to 50 °C)
Altitude	Operating: 2,000 m Storage: 12,000 m
Electromagnetic compatibility EMI, RFI, EMC, RF	EN 61326-1:2006, EN 61326-2-2:2006 ETSI EN 300 328 V1.7.1:2006, ETSI EN 300 489 V1.8.1:2008, FCC Part 15 Subpart C Sections 15.207, 15.209, 15.249 FCCID : FCC: T68-FDMMBLE IC: 6627A-FDMMBLE
Safety compliance	ANSI/ISA 61010-1 / (82.02.01): 3rd edition CAN/CSA-C22.2 No 61010-1-12: 3rd edition UL 61010-1: 3rd edition IEC/EN 61010-1:2010
Certifications	CSA, FCC, CE
Ingress Protection (IP) rating	IP54
Pollution degree	2
Size (H x W x L)	4.75 cm x 9.3 cm x 20.7 cm (1.87 in x 3.68 in x 8.14 in)
Weight	340 g (12 oz)
Warranty	Three years

Note: Not compatible with Fluke CNX test tools

Fluke a3001 FC Wireless iFlex AC Current Module

Specifications
Range	0.5 A to 2500 A AC
Resolution	0.1 A
Accuracy	3 % ± 5 digits (5 Hz to 500 Hz)
Crest factor (50 Hz/60 Hz)	3.0 at 1100 A, 2.5 at 1400 A, 1.42 at 2500 A, add 2 % for C.F. > 2
LCD w/backlight	3½ digits
Log rate/interval	1 sec minimum/adjustable by PC or front panel
Battery type	2 AA, NEDA 15 A, IEC LR6
Battery life	400 hours
Memory	Record up to 65,000 readings
RF communications	2.4 GHZ ISM Band
RF communication range	Open air, unobstructed: Up to 20 m Obstructed, sheetrock wall: Up to 6.5 m Obstructed, concrete wall or steel electrical enclosure: Up to 3.5 m
Operating temperature	-10 °C to +50 °C
Storage temperature	-40 °C to +60 °C
Temperature coefficient	Add 0.1 X (specified accuracy)/ °C (<18 °C or >28 °C)
Operating humidity	90 % at 35 °C, 75 % at 40 °C, 45 % at 50 °C
Altitude	Operating: 2,000 m Storage: 12,000 m
EMC	EN 61326-1:2006
Safety compliance	IEC 61010-1, 600 V CAT IV/1000 V CAT III, 3rd edition
Safety rating	CAT IV 600 V, CAT III 1000 V
Certifications	CSA, CE, FCC: T68-FBLE IC: 6627A-FBLE
Ingress Protection (IP) rating	IP42
Pollution degree	2
Jaw opening	25.4 cm (10 in) coil
Size (HxWxD)	16.5 cm x 6.35 cm x 1.4 cm (6.5 in x 2.5 in x 1.4 in)
Weight	.22 kg (8 oz)
Warranty	Three years

Note: Not compatible with Fluke CNX test tools

Descripcion

Cuando usted combina la Cámara Térmica Ti200 con la Aplicación Fluke Connect® y el kit Fluke a3001FC iFlex usted obtiene una poderosa solución que le permite identificar y diagnosticar problemas potenciales rápidamente directamente desde el campo. Agregue todos sus datos de ambas inspecciones en la aplicación Fluke Connect y usted puede compartir sus resultados instantáneamente desde cualquier lugar, con cualquier compañero de equipo, en cualquier momento. Comience a ahorrar tiempo e incrementar su productividad desde este momento.

La Cámara Térmica Ti200 es una de las únicas tres cámaras térmicas en el portafolio de Fluke que están equipadas con LaserSharp® Auto Focus para consistemente obtener imágenes enfocadas. Siempre. Sin. Excepción. Sin una imagen enfocada, las medidas de temperatura podrían estar erróneas por hasta 20 grados, haciéndo mucho más fácil omiir un problema potencia. LaserSharp Auto Focus le dice exáctamente donde está enfocando. Utiliza un láser para calcular la distancia hacia su objetivo antes de enfocar. Coloque el punto rojo de láser en el equipo que está inspeccionando, entonces jale y suelte el gatillo para una imagen perfectamente enfocada.

Comparte tu conocimiento de este producto con otros clientes... Se el primero en escribir un comentario

Navegue por mas productos en la misma categoria de este articulo:

Fluke