|
GRS-6052A |
GRS-6032A |
| CRT |
| Type and Acceleration |
6-inch CRT, 10kV |
6-inch CRT, 2kV |
| Illumination |
Front panel control |
| Z-axis Input |
Sensitivity : at least 5V
Polarity : positive going input decreases intensity
Max. input voltage:30V(DC+ACpeak) |
| Input Impedance : approx. 33kĦ |
Input Impedance : approx. 47kĦ |
| VERTICAL SYSTEM |
| Deflection Coefficient and Accuracy |
1mV ~ 2mV/div }5%,
5mV ~ 20V/div }3%,
14 steps in 1-2-5 sequence |
| Variable Continuity |
2.5 : 1 ~ min. 50V/div |
| Bandwidth (-3dB) |
1mV ~ 2mV/div: DC~7MHz
5mV ~ 20V/div: DC~50MHz |
1mV ~ 2mV/div: DC~7MHz
5mV ~ 20V/div: DC~30MHz |
| Vertical Mode |
CH1, CH2, DUAL (ALT or CHOP) |
| Chopper Frequency |
Approx. 250kHz |
| Sum or Difference |
CH1+CH2, CH1-CH2 |
| Invert |
CH2 |
| Input Impedance |
1MĦ }2%//approx. 25pF |
| Input Coupling |
AC, DC, GND |
| Input Voltage |
Max. 400V(DC+ACpeak) |
| HORIZONTAL SYSTEM |
| Sweep Time |
0.2ƒÊs/div ~ 0.5s/div, 20 steps |
| Variable Continuity |
2.5 : 1 up to 1.25s/div (uncal.) |
| Accuracy |
}3%, }5% at x5/ x10MAG. }8% at x 20MAG |
| Sweep Magnification |
x5, x10, x20 |
| Max. Sweep Time |
20ns/div (10ns/div uncal) |
50ns/div (10ns~40ns/div uncal) |
| ALT-MAG Function |
Yes |
| HOLD-OFF Time |
Variable |
| TRIGGER |
| Trigger Mode |
AUTO, NORM, TV |
| Trigger Source |
VERT, CH1, CH2, LINE, EXT |
| Trigger Coupling |
AC, HFR, LFR |
| Trigger Slope |
g+horg - hpolarity |
| ALT Trigger |
Yes |
| Indicator Trigger LED |
Yes |
| TV Sync. Separator |
TV-Vg-h, TV-Hg - h |
Trigger Sensitivity
|
|
GRS-6052A |
20Hz~5MHz |
5MHz~40MHz |
40Hz~50MHz |
|
GRS-6032A |
20Hz~2MHz |
2MHz~20MHz |
20Hz~30MHz |
|
CH1, CH2 |
0.5div |
1.5div |
2.0div |
|
Vert-Mode |
2.0div |
3.0div |
3.5div |
|
EXT |
200mV |
800mV |
1V | TV sync. pulse more than 1 div or 200mV (EXT) |
External Trigger Input
|
Input impedance :Approx. 1MĦ//25pF (AC coupling)
Max. input voltage : 400V (DC + ACpeak) |
| X-Y OPERATION |
| Input |
X-axis : CH1 ; Y-axis : CH2 |
| Sensitivity |
1mV/div ~ 20V/div |
| Bandwidth |
X-axis : DC ~ 500kHz (-3dB) |
| X-Y Phase Shift |
<3‹ from DC ~ 50kHz |
| DIGITAL STORAGE |
| Acquisition Digitizer |
8 bit ADC x 2 |
Max. Sampling Rate
|
500MSa/s for equivalent time sampling
100MSa/s for normal sampling |
| Storage Bandwidth |
Single shot: DC ~ 25MHz
Repetitive: DC ~50MHz |
Single shot: DC ~ 25MHz
Repetitive: DC ~30MHz |
| Dynamic Range |
}5div |
| Memory Length- Acquisition Memory |
2k words/CH x 2, 1k words/CH(equivalent) |
| Memory Length- Save REF Memory |
1k words/CH x 10 with back-up memory (REF0~REF9) |
| Memory Length- Display Memory |
1k words/CH x 4 waveform(max.) |
| Sweep Time |
Equivalent: 0.2ƒÊs/div ~ 0.5ƒÊs/div
Normal Sample: 1ƒÊs/div ~ 0.1s/div
Roll: 0.2s/div ~ 100s/div |
| Sweep Magnification |
x 5, x 10, x 20 |
| Max.Sweep Time |
10ns/div |
| MAG Interpolation |
DOTS, LINEAR |
| ALT-MAG Function |
Yes |
| Acquire Mode |
Sample, peak detect(>25ns), Envelop. Persist, Average(2~256) |
| Operation Mode |
Auto, Norm, Single, Single-roll, Roll, X-Y, Run/Stop |
| Smoothing Function |
Dot joint ON/OFF selectable |
| Pre-Trigger |
Pre-trigger 0 ~10div in 0.02div steps |
| X-Y Operation |
X-axis: CH1 Y-axis: CH2 |
| Storage Bandwidth |
DC~50MHz(-3dB) |
| Display Resolution |
H: 100points/div; V: 25points/div;
X-Y: 25 x 25 points/div |
| SAVE/ RECALL |
| Panel Setting |
10 sets(M0 ~M9) |
| Waveform |
10 sets(REF0~REF9) |
| READOUT & CURSOR |
| Cursor Measurement |
ĢV, ĢT, 1/ ĢT |
| Readout Intensity |
Adjustable |
| OUTPUT SIGNAL |
| CH1 Signal Output |
Voltage : approx. 20mV/div (with 50Ħ terminated)
Bandwidth : 50Hz ~ 5MHz |
Calibrator Output
|
Voltage : 0.5V}3%
Frequency : approx. 1kHz, square wave |
| INTERFACE |
| |
RS-232C |
| POWER SOURCE |
| |
AC 100V/120V/230V}10%, 50/60Hz |
| DIMENSIONS & WEIGHT |
| |
275(W) x 130(H) x 370(D) mm; Approx. 8.5kg |
