Geotest GX7930 PXI

Instrumentos:

Para pruebas de:

Inicio >

Geotest GX7930 PXI Bus 3U Ranura simple Embedded Controller para GX730x. 1.4GHz Pentium M, 512 MB de RAM

GX7930

Preguntar por precio y disponbilidad

Disponibilidad: Producto descontinuado
Codigo del Producto: GX7930-14512

Descripcion

Detalle del producto

Specifications


Processor and Memory

CPU	Intel Pentium® 4 Processor 1.4 and 1.8 GHz versions 1MB/2MB L2 cache 400 MHz PSB 479-pin micro FCPGA

MEMORY

Main Memory	Up to 1 GB soldered DDR SDRAM memory

Other Memory	1 MB FWH for BIOS 8 Kbyte EEROM for CMOS data storage (no battery operation)

External Interfaces

CompactPCI BUS Interface	Compliant with CompactPCI sepcification PICMG 2.0 R3.0 System master operation 64-bit /33 MHz master interface 3.3 V/5.0 V compatible (default is 5.0 V)


Peripheral I/O Ports

COM1 and COM2	Dual UART, 16C550 compatible Rear I/O only

USB Interface	Four USB 2.0 ports supporting UHCI and EHCI: Two USB type connectors on the front panel Two rear I/O interfaces

Ethernet Interface	10/100/1000 MB/s Gigabit Ethernet interface based on the Intel 82540EM (Kernal-32) Ethernet PCI bus controller: One 10/100 BASE-T Ehternet interface based on the Intel 82801DB controller (front and rear I/O connection)


Internal Interfaces

VGA Interface	Built-in Intel 3D graphics accelerator for enhanced graphics performance: Supports resolutions of up to 2048x1536 by 16-bit at 60 Hz refresh rate Hardware motion compensation for software MPEG2 and MPEG4 decoding Flexible allocation of video memory up to 64 MB 15-pin D-sub VGA CRT-display connector with analog video signals

CompactFlash	CompactFlash type II socket (true IDE mode) Supports type I and II CompactFlash cards and IBM Microdrive™

Monitor and Control

Watchdog	Software configurable Watchdog generates IRQ, NMI, or hardware reset.

System Monitor	LM87 hardware monitor supervision of system power voltages: +12 V, -12 V, +5 V, +3.3 V, and VCORE, thermal control, fan sense (external input)

Enviromental

Mechanical	3U, 4HP, CompactPCI/PXI compliant form factor

Operating Temperature	0˚C to +60˚C -40˚C to +85˚C (optional - extended operating range)

Storage Temperature	-55˚C to +85˚C

Humidity	93% RH at 40˚C, non-condensing

Physical

Mechanical	3U PXI

Dimensions	100mm x 160 mm

Weight	300 g

GX7930 Series

Interface	Front	Rear*	Comments

Serial (RS-232)	–	2	–

USB	2	2	–

Ethernet (10/100 Base T)	1	1	–

Gigabit Ethernet (1000 Base T)	1	–	–

VGA	1	–	–

IDE	–	–	2 (used internally by the chassis)

*Rear panel connections located on the GX7300 chassis

Descripcion

Features


		3U embedded PXI controllers for use with GX7300 Series PXI chassis
		Intel Pentium® M Processor, 1.4 and 1.8 GHz versions
		512 MB RAM standard, 1.GB RAM Max.
		On-board high performance 855GME graphics accelerator
		On-board Gigabit Ethernet
		USB and COM ports
		Extended operating temperature range option

The GX7930 is a single-slot embedded PXI 3U controller for use with Geotest’s GX7300 PXI chassis. The GX7930 is available with various CPU and memory configurations and supports a broad range of peripherals. When combined with the embedded storage peripherals of the GX7300 Series chassis, it is the ideal solution for an integrated PXI chassis / controller configuration.

Configuration

The GX7930 controllers support multiple peripherals and I/O interfaces through either the PXI controller front panel or the rear I/O panel of the GX7300 Series. Connection to the DVD-RW drive and hard drive is via the controller’s internal I/O interface. The controller’s front panel I/O is provided with a factory default configuration and is fully functional in any PXI or cPCI chassis.

The GX7930 embedded system controller adheres to the PXI and cPCI specifications and is PICMG 2.0 Rev. 3.0 compliant.

Applications


		GX70xx PXI chassis
		GX71xx PXI chassis

Comparte tu conocimiento de este producto con otros clientes... Se el primero en escribir un comentario