Inicio > Otros > PXI-LXI-VXI Bus >

Geotest GX5641 Convetidor Bidireccional de 64 Canales TTL a RS-422 para Bus PXI 3U

Geotest GX5641
Preguntar por precio y disponbilidad

Disponibilidad: 4 a 6 Semanas
Código del Producto: GX5641

Descripcion Detalle del Producto


64 bi-directional I/O channels
Bi-directional TTL I/O and LVDS differential I/O ports per channel
128 digital inputs or outputs with direction control
Channels can be programmed to operate in conversion or static I/O modes through software control
Default direction control per channel via 64 on-board switches
Each TTL and differential LVDS output port can be individually enabled/disabled through software control
68-pin VHDCI connectors: two for TTL and two for Differential channels
100-Ohm terminator for each differential I/O signal
Compatible with NI PXI 7811R

The GX5641 is a 3U PXI instrument card that can be used for general data acquisition, process control, Automatic Test Equipment (ATE), Functional Test, and factory automation applications. The GX5641 consists of 64 bi-directional TTL-differential I/O channels. Each channel has two ports (TTL and differential) and can be individually set to operate in either conversion or static I/O modes.

The GX5641 can support 128 individual digital inputs or outputs, 64 TTL, and 64 differential, or 64 conversion channels. Each channel on the GX5641 can be individually programmed to operate in conversion or static modes. Conversion direction defaults can be set by configuring on board switches. Depending on the selected mode, the GX5641’s channels can be predefined to convert TTL to differential or vice versa.


Each channel of the GX5641 can be individually set under software control to operate in one of two modes: conversion or static I/O. In static I/O mode the GX5641 supports 128 individual digital inputs or outputs: 64 TTL and 64 differential ports. The direction of each of these ports can be individually set under software control to be an output or input; e.g., Channel 1 differential port output and Channel 1 TTL port input.

In conversion mode the GX5641 supports 64 individual channels, each of which can be programmed to convert TTL to differential or differential to TTL. Each channel’s predefined DIP-switch conversion direction can be loaded at any time, overriding current settings (predefined defaults).

In both modes of operation, the TTL and differential signals can be monitored. On power-up, all 64 channel outputs are disabled. The GX5641 includes a 100-Ohm terminator for each differential I/O signal.

The GX5641 can also be configured to operate as an independent module, without software control. When configured in independent mode, the module operates in the conversion mode only and the direction of each channel is set at power-up according to the default direction switch settings.


Automatic Test Equipment (ATE) and Functional Test
Data Acquisition
Process Control
Factory Automation


The GX5641 is supplied with a virtual instrument panel, which includes 32-bit DLL driver libraries and documentation. The virtual panel can be used to interactively adjust and control the instrument from a window that displays the current instrument settings and measurements.

In addition, various interface files provide access to the library for programming tools and languages such as ATEasy, Microsoft® and Borland® C/C++, Microsoft Visual Basic®, Borland Delphi, LabVIEW, and others

Comparte tu conocimiento de este producto con otros clientes... Se el primero en escribir un comentario

Navegue por mas productos en la misma categoria de este articulo:

Otros > PXI-LXI-VXI Bus
Fabricantes > Marvin Test
Fabricantes > Marvin Test > Digital I/O PXI