Inicio > Descontinuados >

Rigol DG1022 Generador de Funciones Arbitrario de 2 canales, 20 MHz

Rigol DG1022
DG1022


 
Producto descontinuado

Disponibilidad: Producto descontinuado
Código del Producto: DG1022

Descripción
 

  1. DDS technology: Output signals become more accurateand stable with lower distortion
  2. 2 channels output
  3. 5 standard waveforms: Sine, Square, Ramp, Pulse, Noise,and 48 stored arbitrary waveforms
  4. 100 MSa/s of sample rate, 14 bits of vertical resolution,4k points of memory depth
  5. Intuitionistic user interface, to be easy to use withoutspecification
  6. Versatile modulation and variety of waveforms: AM, FM, PM, FSK, Sweep, Burst
  7. Versatile input and output: External modulation source, External clock reference(10 MHz), External trigger input,
    waveforms output, Synchronous Signal Output
  8. High accuracy and wide band width frequency counter range up to 200 MHz
  9. USB Host, to support USB disk storage
  10. Seamless connectivity with DS series digital oscilloscopes: Lossless recurrence of stored waveforms obtained from DS
  11. Multi-language user interface, built-in help system

Model
DG1022
DG1012
Maximum Output Frequency
20 MHz
15 MHz
I/O
USB Host & Device

 
Model DG1022 DG1012
Standard Waveforms Sine¡¢Square¡¢Ramp¡¢Pluse¡¢Noise and 48 stored arbitrary waveforms
Sine 1 ¦ÌHz to 20 MHz 1 ¦ÌHz ~ 15 MHz
Square 1 ¦ÌHz to 5 MHz 1 ¦ÌHz ~ 4 MHz
Pluse 500 ¦ÌHz to 3 MHz 500 ¦ÌHz ~ 2 MHz
Ramp 1 ¦ÌHz to 150 kHz 1 ¦ÌHz ~ 100 kHz
Arb 1 ¦ÌHz to 5 MHz 1 ¦ÌHz ~ 4 MHz
White Noise 5 MHz(-3db)
Resolution 1 ¦ÌHz
Sine Wave Spectral Purity
Harmonic Distorion < 1 Vpp > 1 Vpp
DC to 20 kHz -70 dBc -70 dBc
20 kHz to 100 kHz -70 dBc -60 dBc
100 kHz to 1 MHz -55 dBc -50 dBc
1 MHz to 10 MHz -40 dBc -35 dBc
Total Harmonic Distorion DC to 20 kHz 1Vpp >0.2%
Spurious (non-harmonic) DC to 1 MHz < -70 dBc
1 MHz to 10 MHz < -70 dBc + 6 dB/octave
Phase Noise 10 kHz Offset ¨C108 dBc / Hz, typical
Square Wave Characteristic
Rise/Fall Time < 20 ns (10% to 90%)
Overshoot < 5%
Duty Cycle 1 ¦ÌHz (include) ¡« 3 MHz (include) 20% to 80%
3 MHz (non-include) ¡« 4 MHz (include) 40% to 60%
4 MHz (non-include) ¡« 5 MHz (include) 50%
Asymmetry(below 50% Duty Cycle) 1% of the period + 20ns
Jitter 6 ns + 0.1% of the period
Pulse Wave Characteristics
Pluse Bandwidth 2000s max,20ns min£¬1ns min resolution
Overshoot < 5%
Jitter 6 ns + 100 ppm of the period
Arb Wave Characteristics
CH1 CH2
Waveform Length 2 to 4k points 2 to 1k points
Amplitude Accuracy 14 bits (including sign) 10 bits (including sign)
Sample Rate 100 MSa/s
Minimum Rising /Falling Time 35 ns
Jitter (RMS) 6 ns + 30 ppm
Non-Volatile Storage 10 waveforms
Output Characteristics
Amplitude 2 mVPP to 10 VPP (50 ¦¸)
4 mVPP to 20 VPP (High Z)
2 mVPP to 3 VPP (50 ¦¸)
4 mVPP to 6 VPP (High Z)
Amplitude Accuracy (1 kHz) ¡À 1% of setting + 1 mVPP
Amplitude Flatness (sine wave relative to 100 kHz) <100 kHz 0.1 dB
100 kHz ¡« 5 MHz 0.15 dB
5 MHz ¡« 20 MHz 0.3 dB
DC Offset
Range (peak AC £« DC) ¡À5V (50 ¦¸)
¡À10 V (High Z)
¡À5V (50 ¦¸)
¡À10 V (High Z)
Accuracy ¡À( 2% of the Offset Setting ¡À 0.5% (|Voffset|) of the Amplitude ¡À 2mV)
AM Modulation(CH1)
Carrier Waveforms Sine, Square, Ramp, Arb
Source Internal/ External
Modulating Waveforms Sine, Square, Ramp, Noise, Arb (2 mHz to 20 kHz)
Depth 0% to 120%
FM Modulation(CH1)
Carrier Waveforms Sine, Square, Ramp, Arb
Source Internal/ External
Modulating Waveforms Sine, Square, Ramp, Noise, Arb (2 mHz to 20 kHz)
Frequency Deviation DC ¡« 5 MHz
PM Modulation(CH1)
Carrier Waveforms Sine, Square, Ramp, Arb
Source Internal/ External
Modulating Waveforms Sine, Square, Ramp, Noise, Arb (2 mHz to 20 kHz)
Phase Deviation 0 ¡« 360¡ã
FSK Modulation(CH1)
Carrier Waveforms Sine, Square, Ramp, Arb
Source Internal/ External
Modulating Waveforms 50% duty cycle square (2 mHz to 50 kHz)
Sweep(CH1)
Carrier Waveforms Sine, Square, Ramp, Arb
Type Linear or Logarithmic
Direction Up or Down
Sweep Time 1 ms ¡« 500 s ¡À 0.1%
Source Internal/External/Manual
Burst(CH1)
Waveforms Sine, Square, Ramp, Pulse, Noise, Arb
Types Count (1 to 50,000 periods), infinite, gated
Start Phase -180¡ã to +180¡ã
Internal Period 1 ¦Ìs to 500 s ¡À 1%
Gate Source External Trigger
Trigger Source Internal/External/Manual
Counter Specification
Function Frequency, period, positive/negative Pulse width, Duty cycle
Frequency range Single channel: 100 mHz ¡« 200 MHz
Frequency resolution 6 bits/s
Trigger mode Trigger level range£º¡À3 V £¨0.1£¥ ¡« 100£¥£©
Resolution£º6 mV
Display 256 Horizontal ¡Á 64 Vertical
Power 100 to 240 VACRMS£¬45 to 440 Hz£¬CAT II£¬Less than 40 VA
Weight 2.7 kg

Comparte tu conocimiento de este producto con otros clientes... Se el primero en escribir un comentario

Navegue por mas productos en la misma categoria de este artículo:

Descontinuados