Amprobe AM-250
| Specification | |
| General Spec. Display | 3-3/4 digits 4000 counts LCD display |
| Polarity | Automatic |
| Update Rate | 3 per second nominal |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Relative Humidity | Maximum relative humidity 80% for temperature up to 31°C decreasing linearly to 50% relative humidity at 40°C |
| Altitude | Operating below 2000m |
| Storage Temperature | -20°C ~ 60°C (-4°F to 140°F), < 80% R.H. (with battery removed) |
| Temperature Coefficient | Nominal 0.15 x (specified accuracy)/°C @(0°C - 18°C or 28°C - 40°C), or otherwise specified |
| Sensing | Average sensing |
| Pollution Degree | 2 |
| Safety | The meter (all versions) is protected, against the users, by double insulation per UL3111-1 (1st Edition), IEC61010-1 (1st Edition) + A1 and A2, CAN/CSA - C22.2 No. 1010.1 - 92 to CAT II 1000V & CAT III 600V. Protection-reinforced CE Terminals (to COM) ratings: V: Category II 1000 Volts AC & DC, and Category III 600 Volts AC & DC. A / mAµA: Category III 500 Volts AC and 300 Volts DC. |
| Overload Protections (Protection- reinforced CE) | µA & mA: 0.63A/500V, IR200kA, F Fuse A: 12.5A/500V, IR20kA, F Fuse V: 1050Vrms, 1450Vpeak Ω & Others: 600VDC/VAC rms |
| E.M.C. (In an RF field of 3V/m) | Capacitance function is not specified AC 4.000V range: Total Accuracy = Specified Accuracy + 700 digits AC 400.0µA range: Total Accuracy = Specified Accuracy + 300 digits Other function ranges: Total Accuracy = Specified Accuracy + 40 digits Performance above 3V/m is not specified |
| Transient protection | 6.5kV (1.2/50µs surge) |
| Power Supply | 1.5V AAA Size (NEDA 24A or IEC LR03) battery X 2 |
| Power Consumption | 3.2 mA |
| Typical Low Battery | Below approx. 2.4V |
| Sleep Mode Timing | Idle for 30 minutes |
| Sleep Mode Consumption | 360µA |
| Specification | |
| General Spec. Display | 3-3/4 digits 4000 counts LCD display |
| Polarity | Automatic |
| Update Rate | 3 per second nominal |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Relative Humidity | Maximum relative humidity 80% for temperature up to 31°C decreasing linearly to 50% relative humidity at 40°C |
| Altitude | Operating below 2000m |
| Storage Temperature | -20°C ~ 60°C (-4°F to 140°F), < 80% R.H. (with battery removed) |
| Temperature Coefficient | Nominal 0.15 x (specified accuracy)/°C @(0°C - 18°C or 28°C - 40°C), or otherwise specified |
| Sensing | Average sensing |
| Pollution Degree | 2 |
| Safety | The meter (all versions) is protected, against the users, by double insulation per UL3111-1 (1st Edition), IEC61010-1 (1st Edition) + A1 and A2, CAN/CSA - C22.2 No. 1010.1 - 92 to CAT II 1000V & CAT III 600V. Protection-reinforced CE Terminals (to COM) ratings: V: Category II 1000 Volts AC & DC, and Category III 600 Volts AC & DC. A / mAµA: Category III 500 Volts AC and 300 Volts DC. |
| Overload Protections (Protection- reinforced CE) | µA & mA: 0.63A/500V, IR200kA, F Fuse A: 12.5A/500V, IR20kA, F Fuse V: 1050Vrms, 1450Vpeak Ω & Others: 600VDC/VAC rms |
| E.M.C. (In an RF field of 3V/m) | Capacitance function is not specified AC 4.000V range: Total Accuracy = Specified Accuracy + 700 digits AC 400.0µA range: Total Accuracy = Specified Accuracy + 300 digits Other function ranges: Total Accuracy = Specified Accuracy + 40 digits Performance above 3V/m is not specified |
| Transient protection | 6.5kV (1.2/50µs surge) |
| Power Supply | 1.5V AAA Size (NEDA 24A or IEC LR03) battery X 2 |
| Power Consumption | 3.2 mA |
| Typical Low Battery | Below approx. 2.4V |
| Sleep Mode Timing | Idle for 30 minutes |
| Sleep Mode Consumption | 360µA |
| Specification | |
| General Spec. Display | 3-3/4 digits 4000 counts LCD display |
| Polarity | Automatic |
| Update Rate | 3 per second nominal |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Relative Humidity | Maximum relative humidity 80% for temperature up to 31°C decreasing linearly to 50% relative humidity at 40°C |
| Altitude | Operating below 2000m |
| Storage Temperature | -20°C ~ 60°C (-4°F to 140°F), < 80% R.H. (with battery removed) |
| Temperature Coefficient | Nominal 0.15 x (specified accuracy)/°C @(0°C - 18°C or 28°C - 40°C), or otherwise specified |
| Sensing | Average sensing |
| Pollution Degree | 2 |
| Safety | The meter (all versions) is protected, against the users, by double insulation per UL3111-1 (1st Edition), IEC61010-1 (1st Edition) + A1 and A2, CAN/CSA - C22.2 No. 1010.1 - 92 to CAT II 1000V & CAT III 600V. Protection-reinforced CE Terminals (to COM) ratings: V: Category II 1000 Volts AC & DC, and Category III 600 Volts AC & DC. A / mAµA: Category III 500 Volts AC and 300 Volts DC. |
| Overload Protections (Protection- reinforced CE) | µA & mA: 0.63A/500V, IR200kA, F Fuse A: 12.5A/500V, IR20kA, F Fuse V: 1050Vrms, 1450Vpeak Ω & Others: 600VDC/VAC rms |
| E.M.C. (In an RF field of 3V/m) | Capacitance function is not specified AC 4.000V range: Total Accuracy = Specified Accuracy + 700 digits AC 400.0µA range: Total Accuracy = Specified Accuracy + 300 digits Other function ranges: Total Accuracy = Specified Accuracy + 40 digits Performance above 3V/m is not specified |
| Transient protection | 6.5kV (1.2/50µs surge) |
| Power Supply | 1.5V AAA Size (NEDA 24A or IEC LR03) battery X 2 |
| Power Consumption | 3.2 mA |
| Typical Low Battery | Below approx. 2.4V |
| Sleep Mode Timing | Idle for 30 minutes |
| Sleep Mode Consumption | 360µA |
Reseñas
