Fluke i3000 Flex

Fluke i3000 Flex AC Current Probe, 4 Pack, Three ranges

Codigo del Producto: I3000-FLEX-4PK

4 a 6 Semanas

Ctd:

Guia de seleccion de sondas Fluke de CA

Three ranges: 30 A, 300 A & 3000 A, 1, 10 or 100 mV/A output

Ideal for current measurement on thick and hard to reach conductors without breaking the circuit

Maximum conductor diameter 178 mm

CAT III 600V safety rating

Electrical specifications

Current ranges

	30 A
	300 A
	300 A
	AC rms

Output sensitivity (AC-coupled)

	1 mV per A
	100 mV
	10 mV
	1 mV per A

Load impedance

100 k¥Ø minimum

Accuracy

at +25 ¡ÆC

¡¾ 1 % of range (45 Hz to 65 Hz)

Linearity

10 % to 100 % of range

¡¾ 0.2 % of reading

Noise

	8 mV ac rms (30 A)
	2 mV ac rms (300 A, 3000 A)

Frequency range

10 Hz to 50 kHz (-3 dB)

Phase error

	< ¡¾ 1 ¨¬ (45 Hz to 65 Hz)
	¡¾ 10 ¨¬ (at 20 kHz)

Position sensitivity

with cable > 25 mm from the coupling

¡¾ 2 % of range

External field

with cable > 200 mm from the head

¡¾ 1 % of range

Power supply

2 x AA/MN 1500/LR6 Alkaline, , 400 hours, low battery indicator or dedicated external power supply

Temperature Coefficient

¡¾ 0.08% of reading per ¡ÆC

Working voltage

see Safety standards section

600 V AC rms or DC

General Specifications

Head cable length (double insulated)

i3000s Flex:	610 mm (24 in)
i3000s Flex-36:	915 mm (36 in)

Head cable diameter

14.3 mm (0.56 in)

Head bend radius

38.1 mm (1.5 in)

Cable length (head to electronics)

2 m (6.56 ft)

Output connection

0.5 m cable terminated with safety BNC connector. Supplied with 4mm safety plug adapter

Operating temperature range

	-20 ¡ÆC to +90 ¡ÆC (-4 ¡ÆF to 190 ¡ÆF) (head)
	-20 ¡ÆC to +85 ¡ÆC (-4 ¡ÆF to 185 ¡ÆF) (electronics)

Storage temperature range

	-40 ¡ÆC to +105 ¡ÆC (-40 ¡ÆF to 221 ¡ÆF) (head)
	-20 ¡ÆC to +85 ¡ÆC (-4 ¡ÆF to 185 ¡ÆF) (electronics)

Operating humidity

15 % to 85 % (non-condensing)

Weight

	180 g (0.396 lb) (head)
	190 g (0.419 lb) (electronics)

Safety standards

	BS EN 61010-1: 2001
	BS EN 61010-2-032: 2002
	BS EN 61010-031: 2002
	600 Vrms, Category III, Pollution Degree 2
	Use of the probe on uninsulated conductors is limited to 600 V AC rms or dc and frequencies below 1 kHz.

EMC standards

EN 61326: 1998 +A1, A2, & A3

Maximum conductor size

610 mm or 914 mm, depending on model

SEARCH

SEARCH

Fluke i3000 Flex AC Current Probe, 4 Pack, Three ranges

Descripcion

Descripcion

Detalle del producto

Reseñas