Tektronix AWSYNC01
El AWGSYNC01 permite la sincronización multi-instrumento de hastacuatro unidades AWG70001A o AWG70002A permiten hasta ocho canales paraalinearse a las entradas de reloj mismo, salto patrón y disparo. El AWGSYNC01no requiere software adicional y permite la sincronización rápida y consistentede múltiples dispositivos. El AWGSYNC01 proporciona puertos de calibracióndesea alinear hasta cuatro AWG70000 instrumentos de ± 10ps. Después del procesode alineación el AWGSYNC01 repetidamente puede volver a dentro ≤5 ps del mismopunto de alineación.
Sincronizacion de salida de señal de dos a cuatro instrumentosAWG70000 (proporcionando siete y cincuenta y ocho salidas de señal)
Sincronizacion de ± 10 ps
Vea todos los canales a la misma resolución
After changes of sample rate or power cycle and within ±5 °C from deskew calibration.
1 kΩ: ±10 VRMS
Synchronous trigger mode: 30,880 / (2 * fclk) ±20 ns
fclk is the frequency of the DAC sampling clock
The DAC sampling clock frequency is displayed on the clock settings tab when the external clock output is enabled.
The asynchronous jitter performance is directly proportional the sync clock out frequency. The sync clock out is derived from the DAC sampling clock. The DAC sampling clock frequency is displayed on the clock settings tab when the external clock output is enabled.
Variable Reference In = 156.25 MHz: 400 fsRMS, 5.6 ps RJp-p BER@10-12
Fixed Reference In = 10 MHz: 1.7 psRMS, 23.8 ps RJp-p BER@10-12
Sample rate = 25 GS/s
Use the supplied orange cable assemblies to connect these ports to the AWG70000 instruments.
5 V TTL compliant (input impedance pull up to 5 V by 1 kΩ resistor)
Minimum pulse width: 64 ns
The DAC sampling clock frequency is displayed on the clock settings tab when the external clock output is enabled
Strobe hold off is the amount of delay required at the end of a waveform before another strobe pulse can be processed
5% to 45% relative humidity above 30 °C up to 50 °C
5% to 45% relative humidity above 30 °C up to 60 °C
Derate maximum operating temperature by 1 °C per 300 meters above 1500 meters.
Derate maximum operating temperature by 1 °C per 300 meters above 1500 meters.
Australia/New Zealand: AS/NZS 2064
Reseñas
