30XR-A
Specifications | ||
| DC Voltage | Ranges | 200 mV, 2 V, 20 V, 200 V, 600V |
| Accuracy | all ranges: ±(1 % rdg + 1 dgt) | |
| Resolution | 100 µV | |
| Input Impedance | 10 MÙ | |
| AC Voltage (45 Hz To 500 Hz) | Ranges | 200 mV, 2 V, 20 V, 200 V, 600 V |
| Accuracy | all ranges: ±(1.5 % rdg + 4 dgts) | |
| Resolution | 100 µV | |
| Input Impedance | 10 MÙ | |
| DC Current | Ranges | 200 µA, 2 mA, 20 mA, 200 mA, 10 A |
| Accuracy | 200 µA to 200 mA ranges: ±(1.5 % rdg + 1 dgt) 10 A range: ±(2.0 % rdg + 3 dgts) | |
| Resolution | 0.1 µA | |
| Voltage Burden (Max) | 200 µA range: 1 mV/µA 2 mA range: 100 mV/1mA 20 mA range: 13 mV/1 mA 200 mA range: 4.6 mV/1 mA 10A range: 40 mV/1 A | |
| AC Current (45 Hz To 500 Hz) | Ranges | 200 µA, 2 mA, 20 mA, 200 mA, 10 A |
| Accuracy | 200 µA to 200 mA ranges: ±(2.0 % rdg + 4 dgts) 10A range: ±(2.5 % rdg + 4 dgts) | |
| Resolution | 0.1 µA | |
| Voltage Burden | 200 µA range: 1 mV/µA 2 mA range: 100 mV/1mA 20 mA range: 13 mV/1 mA 200 mA range: 4.6 mV/1 mA 10A range: 40 mV/1 A | |
| Resistance | Ranges | 200Ù, 2kÙ, 20kÙ, 200kÙ, 2MÙ, 20MÙ |
| Accuracy | 200Ù to 200kÙ ranges: ±(1.0 % rdg + 4 dgts) 2MÙ range: ±(1.5 % rdg + 4 dgts) 20MÙ range: ±(2.0 % rdg + 5 dgts) | |
| Resolution | 100 m | |
| Open Circuit Voltage | 200Ù range: 3.0 V dc All other ranges: 0.3V dc typical | |
| Continuity | Audible Indication | 75Ù ± 25Ù |
| Response Time | 100 ms | |
| Diode Test | Test Current | 1.0 mA (approximate) |
| Accuracy | ± (1.5 % rdg + 3 dgts) | |
| Resolution | 0.001 V | |
| Open Circuit Volts | 3.0 V typical | |
| Battery Test | Ranges | 1.5 V, 9 V |
| Accuracy | ±(3.5 % rdg + 2 dgts) | |
| Resolution | 1 mV, 10 mV | |
| Load Test Current | 1.5 V range: 150 mA typical 9 V range: 5 mA typical | |
| Non-Contact Voltage Detector (NCV) | AC Volts | 70 To 600V AC |
| Overload Protection | AC/DC Voltage | 400 mV range: 600 V dc or 600 V ac rms 15 sec All other ranges: 600 V dc or 600 V ac rms |
| AC/DC Current | uA/mA input: F 0.25 A/ 600 V Min. I.R. 30 kA (6.3 x 32 mm) 10 A inputF 10A / 600V, Min. I.R. 100 kA, (10 x 38 mm) (10 A for 4 minutes maximum followed by a 12 minute cooling period) | |
| Resistance | 600 V dc or 600 V rms | |
| Continuity | 600 V dc or 600 V ac rms | |
| Diode Test | 600 V dc or 600 V ac rms | |
| Battery Test | 600 V dc or 600 V ac rms | |
