
Amprobe AT-5000
| AT-5000 Professional Underground Cable / Pipe Locator System | |
| Depth Measurement | 20 ft |
| Passive Tracing Frequencies | 50, 60, 100 and 120 Hz |
| Transmitter frequency | Adjustable from 491 to 166 kHz |
| A-Frame Ground Fault Locating | Optional |
| R-5000 Active Frequencies (Hz) | 491, 982, 8.44k, 9.82k, 35k, 82k, 83k (North America) 491, 512, 577, 640, 982, 8k, 8.44k, 9.82k, 35k, 65.5k, 82k, 83k |
| R-5000 Passive Frequencies (Hz) | 50, 60, 100, 120, RF (14k-21k) Extended and special frequency sets available |
| R-5000 Depth Display Accuracy | 0-10ft: ±(5%+2”) under ideal field conditions 10-20ft: ±10% under ideal field conditions |
| R-5000 Depth Range | Maximum 20ft (600 cm) |
| R-5000 Battery Type | Li-ion rechargeable 9 AA Alkaline |
| R-5000 Antenna | Distance Sensitive Left/Right Guidance |
| R-5000 Dimensions | 8 ¼” W x 13 ¼” H x 29” L (21.0cm x 33.7 cm x 74.3cm) |
| T-5000 Output Frequencies (Hz) | 491, 982, 8.44k, 9.82k, 35k, 82k, 83k (North America) 491, 577, 640, 982, 8.192k, 8.44k, 9.82k, 35k, 82k, 83k Extended and special frequency sets available |
| T-5000 Output Power | Variable to 10W |
| T-5000 Simultaneous Output | Up to three active frequencies |
| T-5000 Controls | Frequency select, measurement units (mA, Volts, Ohms, Watts), output power, Signal Select™, menu, 4-way navigation, select, SFL, On/Off |
| T-5000 Display Indicators | Battery status, audio volume, output mode, frequency setting, frequency output, % output in SFL or induction mode, output graph, loop resistance graph |
| T-5000 Display | 1/8 VGA monochrome |
| T-5000 Battery Life | NiMH rechargeable or six (6) D alkaline |
| T-5000 Dimensions | 11” W x 6 ¾” H x 9” L (27.9 cm x 17.1 cm x 22.9 cm) |
| T-5000 Regulatory Compliance | FCC, CE |
| T-5000 Environmental | IP54 |
| Included Accessories | Receiver (R-5000), Transmitter (T-5000), connection cable, ground stake, ground cable, and carrying case |

