BK Precision 4017A
El Modelo B & K Precision 4017A Generador de Funciones es unafuente de señal versátil que combina varias funciones en una sola unidad - lageneración de forma de onda, generaciónde impulsos (a través de la simetría variable) , y elbarrido de frecuencia . Adicionalmente, elinstrumento proporciona la comodidad de un built-in (contador de frecuencia) . Esto permite una determinación más precisa defrecuencia de salida que es posible con un dial calibrado simple.Controles de ajuste grueso y fino permitenprecisión de la frecuencia de salida.
model 4017A | |
Frequency Characteristics | |
Waveforms | Sine, Square, Triangle, +-Pulse, +-Ramp |
Range | 0.1 Hz to 10 MHz in 8 ranges |
Resolution | 5 digits |
Tuning Range | 10:1 |
Fine | +-5% of coarse setting |
Variable Duty Cycle | 15:85:15 cont variable |
Operating Modes | Normal, sweep, VCG |
Output Characteristics | |
Impedance | 50W +- 10% |
Level | 20 V p-p Open circuit, 10V p-p into 50 W |
Amplitude | Variable, 20 dB range typical |
Attenuation | -20 dB +- 1 dB |
DC Offset | Preset +- 0.1 V type Variable: +- 10V open-circuit +-5 into 50 W |
SINE Wave | |
Distortion | <=3% typical at 1 kHz |
Flatness | +-5% +-(.45 dB) 0.1 Hz to 8 MHz |
+-20% +-(2.0 dB) 8 MHz to 10 MHz @ 3Vp-p | |
Square wave | |
Symmetry | 0.1 Hz to 100 kHz < 2% |
Rise time | <= 30 ns |
Triangle Wave | Linearity: >= 98% to 100 kHz |
TTL Output | |
Level | 0.8V to 2.4V |
Rise time | <= 20 nS |
Duty Cycle | 50% typical |
CMOS Output | |
Max. Frequency | 2 MHz |
Level | 4V to 14V +-0.5 p-p cont. variable |
Rise Time | <= 120 nS |
VCG (Voltage controlled generator) | |
Input Voltage | 0-10V +- 1V causes a 100:1 frequency change |
Impedance | 10k W +-5% |
Mode | LIN/LOG |
Width | 100:1 continuously variable |
Rate | 0.5s to 30s cont variable |
Sweep Output | 0 to 10V |
Start/Stop Frequencies | NA |
Frequency Counter | |
Accuracy | Time base accuracy +- 1 count |
Time Base Accuracy | +- 10 ppm (23 0 +-5 0 C) |
Display | 5 digit LED |
Mode | NA |
External Input | |
Frequency | Does not apply |
Resolution | 0.1, 1, 10, 100, 1 kHz |
Sensitivity | 25Vrms |
Power Source | 120/230 VAC +-10% |
Dimensions | 4.5x11.75x10.575'' |
Weight | 4 lbs. (1.8 kg) |
Two Year Warranty | |
Accessories | |
SUPPLIED: Output Cable with BNC to Alligator Clips, Instruction Manual | |
Incluye:
Cable de salida de BNC a pinzas caimán, manual deinstrucciones, estuche.
1. BNC Breakout to AlligatorClips Model CC-21 Standard BNC to Alligator clips test leads.
