California Instruments 1001P Convertidor de Frecuencia Electricidad CA Portable 1000 VA CA. Nuevo de Fabrica.DIV>
The 801P, 1001P and 1251P are ideal sources for general purpose AC power applications that require variable voltage and frequency at power levels up to 1250 VA. With simple knobs used to set voltage, frequency and current limit, the P Series provides an inexpensive source of AC power in a small, portable and lightweight package.
Controller Capabilities
The P Series uses a precision digital sinewave generator to produce a low distortion output .Dual LCD readouts clearly display programmed settings for voltage, current limit and frequency. Load current is measured using true RMS sensing and can be displayed on the front panel as well. Adjusting voltage, frequency and current limit is accomplished using a set of digitally encoded rotary knobs. For ATE applications, RS232C interface is available as an option.
Applications
The extended output frequency range of 16 Hz to 500 Hz makes the P Series a suitable source for both commercial as well as avionics applications. Dual voltage ranges provide maximum output current at any programmed voltage up to 270 Volt. The built in rms. current measurement function eliminates the need for external current shunts or transformers to determine load current requirements of the unit under test. For bench use, the P Series features simple and intuitive controls for setting voltage, frequency and current limits. Current drawn by the load can be read directly on the large LCD display to 100 mA resolution. With the addition of the remote control -232 option, the P Series can be used in automated test environments as well.
Remote Control
![Image]( "Image")
The optional RS232C remote control interface (option -232) allows complete control of all AC source functions and provides measurement data to the controller. This allows the P Series to be used as a low cost AC test system. A Windows ™ Graphical User Interface (GUI) program is included with the interface option. Automatic power cycling and transient generation is made possible with the use of this GUI program. The GUI output control, measurement and transient screen is shown here. For quality assurance applications, measured voltage, current and VA readings can be logged to disk for documentation and analysis purposes. All data recorded is time stamped to create a complete history of each test run. Transient programming is supported by the GUI program with user defined transient list of up to 100 steps. Available transient functions are Voltage step, voltage drop, voltage sweep, voltage surge/sag, frequency step, frequency sweep, frequency surge/sag as well as functions that combine both voltage and frequency.
Up to eight often used front-panel setups can be stored in non-volatile memory for quick recall from the PC controller through the interface. If needed, the front panel can be locked out to prevent operator intervention during test runs.
Portable Power, Low Cost.
Portable solution for wide range of AC power tests.
810 VA to 1250 VA Output Power
Capable of handling most single phase applications.
Simple Front Panel Operation
Analog style controls and digital readouts for key functions.
16 Hz to 500 Hz Frequency Range
Utility and Avionics applications.
High Peak Current Capability
Drives a wide variety of non-linear loads.
Remote Control Option
Ideal for Automated test applications.
Windows™ Graphical User Interface software included
Compact AC Power
With European and US outlet sockets to connect the load, the 801P, 1001P and 1251P portable programmable AC power sources are ideal for a wide variety of applications
Universal input allows use anywhere in the world to provide a convenient source of variable utility power for the testing and evaluation of domestic and commercial equipment. All common line voltage and frequency combinations are covered.
In addition, the frequency range covers 500 Hz, making these products ideal for commercial and defense avionics applications.
The current measurement function eliminates the need for an external current shunt or transformer.
Load current of the UUT (Unit Under Test) can be read directly on the large LCD display to 0.1 A. For additional protection, a current limit function can be set from zero to the maximum current available.
High peak current capability of more than three times the RMS current allows the P Series to drive non-linear loads.
Easy To Use Controls
Front panel digital rotary encoders are used to set voltage and frequency. These controls have an analog feel, with the precision and reliability of digital circuits. Settings are read directly on the large high contrast LCD displays.
Both models offer two output voltage ranges, 135 V RMS L-N and 270 V RMS L-N, maximizing the current at the required voltage.
The output frequency can be varied from 16 Hz up to 500 Hz to cover both avionics and utility power applications.
Product Evaluation and Test Applications
Traditional Variac tests can be automated using the P Series AC sources.
With digital voltage readout, and measurement of load current, several items of equipment can be eliminated from ‘first time power up’ tests. All functions are contained in a single convenient and easily portable package, which can be most useful in production applications.
Avionics Applications
As affordable and reliable sources of 400 Hz AC power, the 801P, 1001P and 1251P are well suited for commercial and defense avionics applications.
Remote Control
Equipped with the optional RS232C serial interface, these units are easily integrated into an ATE system. A Windows ™ Graphical User Interface (GUI) program is included for PC control applications.
LOW COST PROGRAMMABLE AC POWER
Low Cost Of Ownership
Careful design, the use of modular construction and quality components, all contribute to provide many years of uninterrupted service. The modular construction allows components or subassemblies to be replaced quickly to minimize downtime.
Ordering Information
Models:
801P 810 VA AC Source
1001P 1000 VA AC Source
1251P 1250 VA AC Source
Options
-232 Optional RS232C Interface. Includes Windows™ Graphical User Interface software and serial cable
-ISS International Socket Strip
-ISR Rackmounted ISS
Line Cord Options:
Country 801P/1001P 1251P
Europe PC11 PC11 Australia / New Zealand PC12 PC12 UK / Ireland PC13 PC13 Denmark PC14 PC14 India PC15 PC15 Israel PC16 PC16 Italy PC17 PC17 North America* PC21 PC18 Switzerland PC19 PC19 Japan PC20 PC20
* One North American Line cord is included.
Supplied with:
North American Line Power Cord USA and European line output mating connector
Instruction Manual
Delivery:
30 days ARO
