ELGAR CW1251P

Elgar CW1251P, Fuente de Poder AC Programable, 1250 VA, 45-500Hz, 0~135Vrms/9.4Arms o 0~270Vrms/4.7Arms (seleccionable)

Codigo del Producto: CW1251P

Producto descontinuado

Ctd:

Ver Hoja de Datos en formato PDF
Remplazo recomendado Asterion AST1501A1-E

Wide range PFC Input
Low THD and AC noise
Advanced Measurement Available
Field Parallel Configurable
Multiple Units Configurable for Poly-Phase Operation

Applications
The ContinousWave (CW) is designed for testing single or polyphase electronics.
The CW is well suited for applications requiring a cost-effective low profile AC source.

Applications include:

Testing for real world sine wave power conditions
400 Hz testing for avionics equipment
50/60 Hz margin testing
Ballast testing
Components testing
Power supply testing for AC to DC converters

Programmable CW Features And Benefits
Front panel encoder knobs allow programming of voltage, current and frequency settings. Programmed or measured values can be viewed on the two LED displays through push button selection. Menu push buttons enable setting system configuration including parallel or three phase operation. This menu also allows setting current shutdown or foldback modes. Remote IEEE-488.2 and RS-232 control interfaces are standard. LEDs indicate: high or low range output voltage, measure or program mode, voltage or current mode operation
and output-on. LED’s indicate menu/status, remote control, lockout and fault conditions. Digital Signal Processing (DSP) based measurements include voltage, current (amperes, peak amperes, crest factor), power (watts, VA and power factor) and frequency.

CW Series : Specifications

Output: Voltage and Current Ranges

Model	CW 801M	CW 1251M	CW 2501M	CW 801P	CW 1251P	CW 2501P
Power	800VA	1250VA	2500VA	800VA	1250VA	2500VA
Voltage
Voltage Range	0 to 135Vrms, 0 to 270Vrms, user selectable
Accuracy (>5VAC)	±1% of Range			±0.1% of Range <100Hz ±0.2% of Range > 100Hz
Resolution	0.1 Vrms
Total harmonic distortion	0.25% typical <100Hz add 0.5%/100Hz above 100Hz
AC noise level (typical)	<50 mVRMS	<50 mVRMS	<100 mVRMS	<50 mVRMS	<50 mVRMS	<100 mVRMS
Amplitude stability¹	±0.1% of full scale			±0.05% of full scale
Load regulation	±0.1% of full scale voltage for a full resistive load to no load (<10 mVRMS typical, measured at point of sense)
Line regulation	±0.1% of full scale voltage for a ±10% line change from nominal line voltage (<5 mVRMS typical, measured at point of sense)
Remote voltage sense	5 Vrms total lead voltage drop
Current
135VAC Range	6.0 ARMS	9.4 ARMS	18.6 ARMS	6.0 ARMS	9.4 ARMS	18.6 ARMS
270VAC Range	3.0 ARMS	4.7 ARMS	9.3 ARMS	3.0 ARMS	4.7 ARMS	9.3 ARMS
Accuracy	± 0.5% typical			± 0.5% max
Resolution	0.1 ARMS			0.01 ARMS
Frequency Range
Range	45 to 500 Hz			45 to 500 Hz, 45 to 1000 Hz (option)
Accuracy	±0.5% typical			±0.02% max
Resolution	0.1 Hz			0.1 Hz, 0.01 Hz for remote programming
Phase	All models single phase output. Multi-phase system configuration with Digital Expansion Cable
Power Factor of Load	0 lag to 0 lead

Measurements

Model	CW 801M	CW 1251M	CW 2501M	CW 801P	CW 1251P	CW 2501P
Power	800VA	1250VA	2500VA	800VA	1250VA	2500VA
Voltage
Range	0 to 270 Vrms			0 to 270 Vrms, 0 to 310VRMS (option)
Accuracy² (VAC>5V)	± 1% of full range			±0.1% of range <100 Hz, ± 0.2% of range>100 Hz, ± 0.3% of range>500 Hz (option)
Resolution	0.1 Vrms			0.1 Vrms
Current³
135VAC Range	6.0 ARMS	9.4 ARMS	18.6 ARMS	6.0 ARMS	9.4 ARMS	18.6 ARMS
Accuracy	±2% of range for linear loads with current >0.2A, > 0.4A for 2500 VA			±0.5% of range for linear loads
Resolution	0.1 ARMS			0.01 ARMS
Peak Current³
Range	-	-	-	0 to 25A	0 to 35A	0 to 70A
Accuracy	-	-	-	±1% of Range
Resolution	-	-	-	0.1A
Frequency
Range	45 to 500 Hz			45 to 500 Hz, 45-1 000 Hz (option)
Accurace	± 0.5% of reading			± 0.02% of value
Resolution of display	0.1 Hz			0.1 Hz

Measurements

Model	CW 801P	CW 1251P	CW 2501P
Power	800 VA	1250 VA	2500 VA
Power³
Range	0 to 800W	0 to 1250W	0 to 2500W
Accuracy	±2% of range for linear loads
Resolution	1W
Apparent Power³
Range	0 to 800 VA	0 to 1250 VA	0 to 2500 VA
Accuracy	±2% of range for linear loads
Resolution	1 VA
Power Factor³
Range	0 to 1
Accuracy	±4% of range for linear loads
Resolution	0.01
Crest Factor
Range	0 to 3.5
Accuracy	±5% of range
Resolution	0.01
Phase
Range	-359 to +359 degrees. Positive indicates time lag from reference
Accuracy	Within 100 microseconds of equivalent angle
Resolution	1 degree

AC Input

Model	CW 801M	CW 1251M	CW 2501M	CW 801P	CW 1251P	CW 2501P
Power	800VA	1250VA	2500VA	800VA	1250VA	2500VA
Voltage	90 to 264 VAC	103 to 264 VAC	180 to 264 VAC	90 to 264 VAC	103 to 264 VAC	180 to 264 VAC
Current	13 ARMS max	18.5 ARMS max	19.5 ARMS max	13 ARMS max	18.5 ARMS max	19.5 ARMS max
Frequency	47 to 63 Hz
Phases	single-phase
Power Factor	>0.99 typical at full load nominal line
Efficiency	>73% typical at full load

Physical

Model	CW 801M	CW 1251M	CW 2501M	CW 801P	CW 1251P	CW 2501P
Dimensions	19 W x 5.216 H x 20.07 D	19 W x 5.216 H x 20.07 D	19 W x 5.216 H x 20.07 D	19 W x 5.216 H x 20.07 D	19 W x 5.216 H x 20.07 D	19 W x 5.216 H x 20.07 D
Weight	48Lbs (22kg)	53Lbs (24kg)	86Lbs (39kg)	48Lbs (22kg)	53Lbs (24kg)	86Lbs (39kg)
Shipping Weight	56Lbs (25kg)	61Lbs (28kg)	94Lbs (43kg)	56Lbs (25kg)	61Lbs (28kg)	94Lbs (43kg)

Common

Front Panel Indicators	Displays & indicators menu/status Enter/escape buttons are present for programming Voltage mode (volts, watts, VA, PF) Green LED Measure (amps, Hz, Pk amps, CF) Green LED Program (amps, Hz I Limit) Green LED Voltage range high/low Green LED
Regulatory compliance	CE mark, UL and CUL (consult factory for availability)

Environmental

Cooling	Dual fan speed with side air intake, exhaust to rear
Operating temperature	0 to 40°C
Storage temperature	-40 to +70°C
Humidity	0 to 85% at 25°C derate to 50% at 40°C (non condensing)
Altitude	Operating full power available up to 6,000 feet, non operating to 40,000 feet

SEARCH

SEARCH

Elgar CW1251P, Fuente de Poder AC Programable, 1250 VA, 45-500Hz, 0~135Vrms/9.4Arms o 0~270Vrms/4.7Arms (seleccionable)

Descripcion

Descripcion

Detalle del producto

Reseñas