3159-01, HIOKI Insulation/Withstanding Tester
Specifications |
Withstanding test section |
Testing voltage | 0 to 2.5 kV / 0 to 5.0 kV AC, dual-range configuration (Average value rectified, effective value display)
500 VA (maximum 30 minutes) |
Voltage setting method | Manually setting |
Waveform | Same as the power supply waveform |
Frequency | Same as the power supply frequency |
Measurement range | Current: 0.01 mA to 120 mA, ±(3 % f.s. +20 µA) 2 mA/8 mA/32 mA/120 mA AC (Average value rectified, effective value display) |
Insulation test section |
Testing voltage | 500 V DC/1000 V DC |
Measurement range | 2 M-Ohm to 2000 M-Ohm (500 V), 4 M-Ohm to 2000 M-Ohm (1000 V) |
General |
Judgment function | Contents: UPPER-FAIL / PASS / LOWER-FAIL (Digital setting window comparator method) |
Timer section | Setting range: 0.5 to 999 seconds |
Interfaces | EXT I/O, EXT SW, RS-232C |
Display | Fluorescent tube display (digital), Analog meter |
Monitor function | Output voltage, detection current |
Power supply | 120 V AC, 50/60 Hz (3159-01), 220 V AC, 50/60 Hz (3159-02), 230 V AC, 50/60 Hz (3159-03), 240 V AC, 50/60 Hz (3159-04) |
Dimensions, mass | 320 mm(12.60 in)W × 155 mm(6.10 in)H × 330 mm(12.99 in)D, 18 kg (634.9 oz) |
