Navigate to the Final Test homepage

Embarcamos a cualquier
lugar del mundo!

-
Inicio >
Rigol DSA832E, Analizador de Espectro de 3.2 GHz

DSA832E

Rigol DSA832E, Analizador de Espectro de 3.2 GHz

Rigol
$
Codigo del Producto: DSA832E
4 a 6 Semanas
La nueva serie DSA800 de analizadores de espectro de Rigol redefine la categoría de producto estableciendo nuevos estándares de desempeño y precio. La familia DSA800 cuenta con una singular pantalla panorámica, diseño compacto, e interfaz y operaciones fácles de usar, haciéndola ideal para aplicaciones de banco o de campo en prueba y producción de RF e inalámbrico. El nuevo analizador de espectro ofrece la habilidad de medir señales más pequeñas utilizando nuestro filtro IF digital, que permite configuraciones de ancho de banda más pequeñas y reduce los niveles de ruido desplegados. El DSA832 y el DSA875 tienen un RBW configurable tan bajo como 10 Hz y un DANL (nivel de ruido desplegado promedio) tan bajo como -161 dBm (típico). Adicionalmente, Rigol ofrece grandiosas opciones incluyendo un filtro EMI, un kit detector de cuasi-picos, generador de seguimiento, y preamplificador. Ya sea que su aplicación sea la verificación de radio a 455 MHz o monitorear el 3er armónico de señales de 2.4 GHz, usted encontrará en analizador de espectro adecuado en la familia actualizada DSA800.

  • Rango de frecuencia de 9 kHz a 3.2 GHz
  • Nivel de Ruido Desplegado Promedio (DANL) normalizado a 1 Hz que va de -135 dBm a -161 dBm típicamente
  • Ruido de Fase de offset -80 a -98 dBc/Hz @ 10 kHz
  • Incertidumbre Total de Amplitud de <1.5 dB a <0.8 dB nominal
ModelDSA815
DSA815-TG		DSA832E
DSA832E-TG		DSA832
DSA832-TG		DSA875
DSA875-TG
Frequency
FrequencyRange9kHz - 1.5GHz9kHz - 3.2GHz9kHz - 7.5GHz
Resolution1Hz
Resolution BandwidthBandwidths (-3dB)100Hz to 1MHz
in 1-3-10 sequence		10Hz to 1MHz, in 1-3-10 sequence
RBW Uncertainty<5% nominal
Filter Shape Factor (60dB : 3dB)<5 nominal
Video BandwidthBandwidths (-3dB)1Hz to 3MHz, in 1-3-10 sequence
Option EMI-DSA800 Bandwidths (-6dB)200Hz, 9kHz, 120kHz
Internal ReferenceFrequency10MHz
Accuracy±(time since last calibration x aging rate + temperature stability + calibration accuracy)
Initial Calibration Accuracy<1ppm
Temperature Stability [1]<2ppm<1ppm<0.5ppm
Aging Rate<2ppm/year<1ppm/year
Frequency Readout AccuracyMarker Resolutionspan / (number of sweep points - 1)
Marker Uncertainty±(frequency indication x reference frequency accuracy + 1% x span
+ 10% x resolution bandwidth + marker resolution)
Frequency CounterResolution1Hz, 10Hz, 100Hz, 1kHz, 10kHz, 100kHz
Uncertainty±(frequency indication × reference frequency accuracy + counter resolution)
Frequency SpanRange0Hz, 100Hz to maximum frequency of instrument
Uncertainty±span / (number of sweep points - 1)
SSB Phase Noise [2]@ 10kHz offset<-80dBc/Hz<-90dBc/Hz<-98dBc/Hz
@ 100kHz offset<-100dBc/Hz typ.
Residual FM [3]<50Hz nom.<20Hz nom.
Amplitude
Measurement RangeDANL to +20dBm (f c ≥10MHz)
Maximum Input LevelCW RF Power+20dBm (attenuation = 30dB)
Please refer to the DSA700 series datasheet for more detail
Maximum Damage Level+30dBm (1W)
Please refer to the DSA700 series datasheet for more detail
When fc ≥10 MHz, the input level is >+25 dBm and the PA is off, the protection switch will be on
DC Voltage50V
Displayed Average Noise Level, DANL [4]
Preamplifier Off		9kHz - 100kHz<-120dBm/Hz typ.
100kHz - 1MHz<-110dBm/Hz, <-130dBm/Hz typ.<-132dBm/Hz, <-135dBm/Hz typ.<-135dBm/Hz, <-138dBm/Hz typ.
1MHz - 5MHz<-135dBm/Hz typ.
5MHz - 1.5GHz<-137dBm/Hz, <-140dBm/Hz typ.<-140dBm/Hz, <-144dBm/Hz typ.
1.5GHz - 3.2GHz
3.2GHz - 6GHz<-136dBm/Hz, <-140dBm/Hz typ.
6GHz - 7.5GHz<-131dBm/Hz, <-135dBm/Hz typ.
Displayed Average Noise Level, DANL [4]
Preamplifier On		100kHz - 1MHz<-130dBm/Hz, <-150dBm/Hz typ.<-152dBm/Hz typ.
1MHz - 5MHz<-155dBm/Hz typ.<-150dBm/Hz, <-153dBm/Hz typ.<-152dBm/Hz, <-155dBm/Hz typ.
5MHz - 1.5GHz<-155dBm/Hz, <-158dBm/Hz typ.<-157dBm/Hz, <-161dBm/Hz typ.
1.5GHz - 3.2GHz
3.2GHz - 6GHz<-153dBm/Hz, <-157dBm/Hz typ.
6GHz - 7.5GHz<-148dBm/Hz, <-152dBm/Hz typ.
Display - Level AxisLogarithmic Scale1dB to 200dB
Linear Scale0 to Reference Level
Number of Display Points601
Number of Traces3 + Math Trace
Trace DetectorsNormal, Positive-Peak, Negative-Peak, Sample, RMS,
Voltage Average, Quasi-Peak (with EMI-DSA800 option)
Trace FunctionsClear Write, Max Hold, Min Hold, Average, View, Blank
UnitsdBm, dBmV, dBμV, nV, μV, mV, V, nW, μW, mW, W
Frequency Response
Preamplifier Off		100kHz - 1.5GHz<0.7dB<0.5dB, <0.3dB typ.
1.5GHz - 3.2GHz<0.7dB<0.5dB, <0.3dB typ.
3.2GHz - 7.5GHz<0.7dB, <0.3dB typ.
Frequency Response
Preamplifier On		100kHz - 1.5GHz<1.0dB<0.7dB, <0.3dB typ.
1.5GHz - 3.2GHz<1.0dB<0.7dB, <0.3dB typ.
3.2GHz - 7.5GHz<0.9dB, <0.3dB typ.
Input AttenuatorRange0dB to 30dB in 1dB steps
Switching Uncertainty [5]<0.5dB<0.3dB
Absolute Amplitude Uncertainty [6]<0.4dB<0.3dB
RBW Switching Uncertainty<0.1dB (relative to 1kHz RBW)
Reference LevelRange-100dBm to +20dBm in 1dB steps
Resolution0.01dB (log scale)
4 digits (linear scale)
Preamplifier Gain20dB nom.17dB nom.
Level Measurement Uncertainty [7]<1.5dB nom.<1.0dB nom.<0.8dB nom.
RF Input VSWR300kHz - 3.2GHz<1.5:1 nom. (attenuation ≥10dB)
3.2GHz - 7.5GHz<1.8:1 nom.
(attenuation ≥10dB)
Second Harmonic Intercept [8]+40dBm+45dBm
Third-Order Intercept [9]+10dBm+7dBm+11dBm, +15dBm typ.
1dB Gain Compression Point (P1dB) - Input Mixer [10]>0dBm
Spurious ResponseInherent [11]<-88dBm typ.<-90dBm typ. [xxx], <-100dBm typ.
Intermediate Frequency<-60dBc
System Related Sidebands [12]<-60dBc
Input Related Spurious<-60dBc (mixer level = -30dBm)
Sweep
Sweep ModeContinuous, Single
Sweep TimeSpan ≥ 100Hz10ms to 1,500s10ms to 3,200s10ms to 7,500s
Zero Span20µs to 1,500s20µs to 3,200s20µs to 7,500s
Sweep Time Uncertainty5% nom. (span ≥100Hz or zero span sweep time setting >1ms)
Tracking Generator (Option)
Frequency Range100kHz to 1.5GHz100kHz to 3.2GHz100kHz to 7.5GHz
Output Level Range-20dBm to 0dBm-40dBm to 0dBm
Output Level Resolution1dB
Output Flatness±3dB nom., relative to 50MHz
Trigger
Trigger SourceFree Run, Video, External
External Trigger Level5V TTL
Input / Output
RF InputImpedance50Ω
ConnectorN-type female
Tracking GeneratorImpedance50Ω
ConnectorN-type female
Internal ReferenceFrequency10MHz
Output Level+3dBm to +10dBm, +8dBm typ.
Impedance50Ω nom.
ConnectorBNC female
External ReferenceFrequency10MHz ± 5ppm
Input Level0dBm to +10dBm
Impedance50Ω nom.
ConnectorBNC female
External Trigger InputImpedance1kΩ nom.
ConnectorBNC female
USB HostConnectorA plug
Protocolv2.0
USB DeviceConnectorB plug
Protocolv2.0
LANLXI core 2011 device10/100 Base, RJ-45
IEC/IEEE (GPIB) bus (Optional)IEEE488.2
General Specifications
DisplayType10MHz ± 5ppm
Resolution0dBm to +10dBm
Size8"
Colours64k
Printer SupportPictBridge
MemoryInternalFlash disk
ExternalUSB storage device (not supplied)
Power SupplyAC Input Voltage Range100V to 240V nom.
AC Supply Frequency45Hz to 440Hz
Power Consumption35W typ., 50W max. with all options
EnvironmentalTemperature0⁰C to 50⁰C, operating
-20⁰C to 70⁰C, storage
Humidity≤95% relative humidity (0⁰C to 30⁰C)
≤75% relative humidity (30⁰C to 40⁰C)
Altitude3,000m max.
EMCIn line with EN61326-1:2006
IEC 61000-4-2:2001±4.0kV (contact discharge)
±4.0kV (air discharge)
IEC 61000-4-3:20023V/m (80MHz to 1GHz)
3V/m (1.4GHz to 2GHz)
1V/m (2.0GHz to 2.7GHz)
IEC 61000-4-4:20041kV power lines
IEC 61000-4-5:20010.5kV (phase to neutral)
0.5kV (phase to PE)
1kV (neutral to PE)
IEC 61000-4-6:20033V (0.15MHz to 80MHz)
IEC 61000-4-11:2004voltage dip: 0% UT during half cycle, 0% UT during 1 cycle, 70% UT during 25 cycles
short interruption: 0% UT during 250 cycles
Dimensions (W x H x D)362mm x 179mm x 128mm
Weight4.25kg (9.4lb)4.55kg (10.0lb) without tracking generator
5.15kg (11.4lb) with tracking generator
Recommended Calibration Interval1 year
  • [1] 0⁰C to 50⁰C, referenced to 25⁰C
  • [2] 20⁰C to 30⁰C, fc = 1GHz
  • [3] 20⁰C to 30⁰C, RBW = VBW = 1kHz
  • [4] attenuation = 0dB, RBW = VBW = 100Hz, sample detector, trace average ≥ 50, 20℃ to 30℃, input impedence = 50Ω
  • [5] fc = 50MHz, relative to 10dB, 20℃ to 30℃
  • [6] fc = 50MHz, peak detector, preamplifier off, attenuation = 10dB, input signal level = -10dBm, 20℃ to 30℃
  • [7] 95% confidence level, S/N >20dB, RBW = VBW = 1kHz, preamplifier off, attenuation = 10dB, -50dBm < input level ≤ 0dBm, fc >10MHz, 20℃ to 30℃
  • [8] fc ≥50MHz, input signal level = -20dBm, attenuation = 10dB
  • [9] fc ≥50MHz, two -20dBm tones at input mixer spaced by 200kHz, attenuation = 10dB
  • [10] fc ≥50MHz, attenuation = 0dB
  • [11] Input terminated 50Ω, attenuation = 0dB, 20℃ to 30℃
  • [12] Referenced to local oscillators, referenced to A/D conversion, referenced to subharmonic of first LO, referenced to harmonic of first LO

Reseñas

Escriba una reseña
Calificación promedio de los clientes:
( 0 )
Empty Cart